Desorption of Organic Micropollutants from Loaded Granular Activated Carbon

Adsorption of Volatile Organic Compounds from Aqueous Solution by Granular Activated Carbon (GAC) in Batch System

Desorption of Reactive Red 198 from activated carbon prepared from walnut shells: effects of temperature, sodium carbonate concentration and organic solvent dose

This study investigated the effect of temperature, different concentrations of sodium carbonate,and the dose of organic solvent on the desorption of Reactive Red 198 dye from dye-saturated activated carbon using batch and continuous systems. The results of the batch desorption test showed 60% acetone in water as the optimum amount. However, when the concentration of sodium carbonate was raised,...

Separation Efficiency of Glucose and Maltose from Industrial Effluent by Granular Activated Carbon

This paper describes the performance of Granular Activated Carbon (GAC) to adsorb and separate glucose and maltose solutes from the industrial effluents by adsorption process. In this study, the capability of Granular Activated Carbon (GAC) to adsorb glucose and maltose were experimentally examined. Commercial GAC (mesh 12-20), supplied by Sigma Aldrich company in...

[Estimation of thermal desorption efficiencies from activated carbon for determination of adsorbed organic solvents].

A method for estimating thermal desorption curves and desorption efficiencies of organic solvents from activated carbon was developed for the determination of adsorbed solvent by thermal desorption method, and the estimated values were compared with the experimental values. The Freundlich or the Langmuir isotherm was assumed in obtaining the solution. Thermal desorption experiments were conduct...

Steady-state and dynamic desorption of organic vapor from activated carbon with electrothermal swing adsorption.

A new method to achieve steady-state and dynamic-tracking desorption of organic compounds from activated carbon was developed and tested with a bench-scale system. Activated carbon fiber cloth (ACFC) was used to adsorb methyl ethyl ketone (MEK) from air streams. Direct electrothermal heating was then used to desorb the vapor to generate select vapor concentrations at 500 ppmv and 5000 ppmv in a...