Determination of fracture parameters for a bi-material center cracked plate subjected to biaxial loading using FEOD method
نویسندگان
چکیده
منابع مشابه
Fracture Parameters for Cracked Cylincal Shells
In this paper, 2D boundary element stress analysis is carried out to obtain the T-stress for multiple internal edge cracks in thick-walled cylinders for a wide range of cylinder radius ratios and relative crack depth. The T-stress, together with the stress intensity factor K, provides amore reliable two-parameter prediction of fracture in linear elastic fracture mecha...
متن کاملA Proposed Method to Evaluate Ultimate Resistance of Plate Girders Subjected to Shear and Patch Loading (RESEARCH NOTE)
Experimental investigation of the ultimate resistance of slender, steel-plate girder web panels to combined shear-and-patch loading indicates significant interaction between shear loading and patch loading. However, an existing interaction formula is based on experimental results. Herein, an improved design procedure for slender plate girders subjected to combined shear and patch loading is pro...
متن کاملA biomechanical study comparing plate fixation using unicortical and bicortical screws in transverse metacarpal fracture models subjected to cyclic loading.
The use of bicortical screws to fix metacarpal fractures has been suggested to provide no added biomechanical advantage over unicortical screw fixation. However, this was only demonstrated in static loading regimes, which may not be representative of biological conditions. The present study was done to determine whether similar outcomes are obtained when cyclic loading is applied. Transverse mi...
متن کاملAttractor Based Analysis of Centrally Cracked Plate Subjected to Chaotic Excitation
The presence of part-through cracks with limited length is one of the prevalent defects in the plate structures. Due to the slight effect of this type of damages on the frequency response of the plates, conventional vibration-based damage assessment could be a challenging task. In this study for the first time, a recently developed state-space method which is based on the chaotic excitation is ...
متن کاملCrack Tip Constraint for Anisotropic Sheet Metal Plate Subjected to Mode-I Fracture
On the ground of manufacturing, sheet metal parts play a key role as they cover about half of the production processes. Sheet metals are commonly obtained from rolling and forming processes which causes misalignment of micro structure resulting obvious anisotropic characteristics and micro cracks. Presence of micro cracks poses serious attention, when stresses at the tip reach to the critical v...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering Solid Mechanics
سال: 2016
ISSN: 2291-8744,2291-8752
DOI: 10.5267/j.esm.2016.2.002