Developing an Efficient Calibration System for Joint Offset of Industrial Robots
نویسندگان
چکیده
منابع مشابه
Automatic Robot Joint Offset Calibration
A contact-based calibration technique using a robot-mounted calibration probe, has been experimented with. The probe is to be implemented by utilizing a wrist-mounted force sensor. The technique is based on constraining the sampled robot joint poses to those where the probe end is in controlled contact with a planar surface. The paper illustrates how the technique may be used to achieve a joint...
متن کاملBase frame calibration for coordinated industrial robots
To solve the problem of base frame calibration for coordinated multi-robot system, a new method is proposed in this paper. It is carried out through a series of ‘‘handclasp’’ manipulations between two coordinated robots, then a preliminary result can be reached by the calibrating equation. After that, in order tomake sure that the calibrated rotationmatrix is orthonormal, an optimal estimation ...
متن کاملnano-rods zno as an efficient catalyst for the synthesis of chromene phosphonates, direct amidation and formylation of amines
چکیده ندارد.
Dynamic Photogrammetric Calibration of Industrial Robots
Today’s developments in industrial robots focus on aims like gain of flexibility, improvement of the interaction between robots and reduction of down-times. A very important method to achieve these goals are off-line programming techniques. In contrast to conventional teach-in robot programming techniques, where sequences of actions are defined step-by-step via remote control on the real object...
متن کاملA two-stage calibration method for industrial robots with joint and drive flexibilities
Abstract. Dealing with robot calibration the neglection of joint and drive flexibilities limit the achievable positioning accuracy significantly. This problem is addressed in this paper. A two stage procedure is presented where elastic deflections are considered for the calculation of the geometric parameters. In the first stage, the unknown stiffness and damping parameters are identified. To t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Mathematics
سال: 2014
ISSN: 1110-757X,1687-0042
DOI: 10.1155/2014/769343