Development and Characterization of Sisal Fiber Reinforced Polypropylene Composite Materials
نویسندگان
چکیده
منابع مشابه
Statistical Behaviour of Hemp and Sisal Fiber Reinforced Polypropylene Composites
The use of vegetal fibres in thermoplastic matrix is increasing mainly because of their opportunity to recycle the structures. An another advantage is to provide materials for developing countries were these fibers are abundant. Nowadays, a lot of studies are more focused on the fibers to understand their microstructure and to establish their mechanical properties [1,2]. One of the main results...
متن کاملThermal Characterization and Fracture Toughness of Sisal Fiber Reinforced Polymer Composite
Interest in natural fiber polymer composite has increased worldwide due to their low cost, low density and good thermal resistivity. Sisal fiber is used as reinforced in mat form and epoxy as matrix in this composite. In present work, thermogravimetric analysis and fracture behavior of composites were studied. The percentage mass loss and physical changes of composite was observed through furna...
متن کاملCoir Fiber Reinforced Polypropylene Composite Panel for Automotive Interior Applications
In this study, physical, mechanical, and flammability properties of coconut fiber reinforced polypropylene (PP) composite panels were evaluated. Four levels of the coir fiber content (40, 50, 60, and 70 % based on the composition by weight) were mixed with the PP powder and a coupling agent, 3 wt % maleic anhydride grafted PP (MAPP) powder. The water resistance and the internal bond strength of...
متن کاملEnergy Systems and Crushing Behavior of Fiber Reinforced Composite Materials
Effect of geometry on crushing behavior, energy absorption and failure mode of woven roving jute fiber/epoxy laminated composite tubes were experimentally studied. Investigations were carried out on three different geometrical types of composite tubes (circular, square and radial corrugated) subjected to axial compressive loading. It was observed in axial crushing study that the load bearing ca...
متن کاملMachinability of glass fiber reinforced plastic (GFRP) composite materials
This paper deals with the study of machinability of GFRP composite tubes of different fiber orientation angle vary from 30 to 90. Machining studies were carried out on an all geared lathe using three different cutting tools: namely Carbide (K-20), Cubic Boron Nitride (CBN) and Poly-Crystalline Diamond (PCD). Experiments were conducted based on the established Taguchi’s Design of Experiments (DO...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Engineering and Management Sciences
سال: 2019
ISSN: 2498-700X
DOI: 10.21791/ijems.2019.1.43.