Development and Comparison of Quantitative Phase Analysis for Duplex Stainless Steel Weld
نویسندگان
چکیده
منابع مشابه
Crystallography of Widmanstätten austenite in duplex stainless steel weld metal
Two kinds of austenite grow from d-ferrite during the cooling of the duplex stainless steel weld deposits studied here, Widmanstätten plates and allotriomorphs which precipitate at d–d grain boundaries. It is found using microtexture measurements that the preferred crystallographic orientation of the Widmanstätten austenite can be estimated using established theory if it is assumed that there i...
متن کاملKinetics of Sigma Phase Formation In a Duplex Stainless Steel
This work determines the kinetics of sigma phase formation in UNS S31803 Duplex Stainless Steel (DSS), describing the phase transformations that occur in isothermal aging between 700 and 900 °C for time periods up to 1032 hours, allowing the determination of the Time-Temperature-Precipitation (TTP) diagram for sigma phase and proposing a model to predict the kinetics of sigma phase formation us...
متن کاملInvestigation of Corrosion Behavior and Galvanic Corrosion Simulation of Super Duplex Stainless Steel UNS S32750 Weld Zone
Galvanic corrosion is an ever-present problem in all different environments, particularly in tanks. The goal of this project is to develop a finite element model that can be used with experimental data to characterize the corrosion of a galvanic weldments couple in an electrolyte. In this study sample are welded by gas tungsten arc welding and friction stir welding. According to ASTM G8, Evalua...
متن کاملInvestigation of Corrosion Behavior and Galvanic Corrosion Simulation of Super Duplex Stainless Steel UNS S32750 Weld Zone
Galvanic corrosion is an ever-present problem in all different environments, particularly in tanks. The goal of this project is to develop a finite element model that can be used with experimental data to characterize the corrosion of a galvanic weldments couple in an electrolyte. In this study sample are welded by gas tungsten arc welding and friction stir welding. According to ASTM G8, Evalua...
متن کاملAutomatic Segmentation of the Secondary Austenite-phase Island Precipitates in a Superduplex Stainless Steel Weld Metal
Victor H. C. Albuquerque & Rodrigo Y. M. Nakamura & João P. Papa Cleiton C. Silva & João Manuel R. S. Tavares Universidade de Fortaleza, Centro de Ciências Tecnológicas, Fortaleza, Brazil Departamento de Computação, UNESP Univ Estadual Paulista, Bauru, Brazil Departamento de Engenharia Metalúrgica e Materiais, Universidade Federal do Ceará, Fortaleza, Brazil Universidade do Porto, Faculdade de ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Periodica Polytechnica Mechanical Engineering
سال: 2018
ISSN: 1587-379X,0324-6051
DOI: 10.3311/ppme.12234