Development of 3D Indirect Boundary Element Methods which Consider Joint Slip and Joint Separation.

Adhesive joint modeling using compatible element formulation

The use...

Exploiting Symmetry in 3D Boundary Element Methods

Many linear operator equations are defined on regions which are invariant under a group Γ of symmetry transformations. If in addition, the linear operator is equivariant with respect to Γ and if a discretization is made which respects the equivariance, the original discretized problem can be decomposed into a collection of much smaller problems, and a significant reduction of computational cost...

Presentation and Analysis of Methods for Increasing Glue Joint Strength in the Same Length Joint

Glue joints are more useful in Aerospace so in this article we presented new method for glue joint. In this method the maximum stresses that occurs at the edges of the bottom glue joint and cause ultimate failure in this type of connection is Decrease and increase the glue joint strength. In this method glue in the area overlapping the discrete and separate column considered Also, the connectio...

Factors to consider in joint prosthesis systems.

In joint reconstruction, the techniques and materials that provide the best outcomes for patients have been debated. The main points of controversy relate to the use of hemiarthroplasties versus total joint prostheses with metal-on-metal versus metal-on-polyethylene articulations. This article investigates these areas as well as the applicability of the techniques and materials and the complica...

A Regular Indirect Boundary Element Method for Thermal Analysis