Development of a unique laboratory scale fluidized bed wear testing unit
نویسندگان
چکیده
منابع مشابه
Control of a Fluidized Bed Polyethylene Reactor
In present paper, dynamic behavior and control of a fluidized bed reactor for polyethylene production has been considered. A double active sites model for Ziegler-Natta catalysts is used for simulation of polymerization reaction. Hydrodynamic behavior of the bed is modeled using a two phase model including bubble and emulsion phases in which bubble phase has plug flow pattern with different...
متن کاملCFD Modeling of TiO2 Nano-Agglomerates Hydrodynamics in a Conical Fluidized Bed Unit with Experimental Validation
In the computational fluid dynamics (CFD) modeling of gas-solids two phase flow, the effect of boundary conditions play an important role in predicting the hydrodynamic characteristics of fluidized beds. In this work, the hydrodynamics of conical fluidized bed containing dried TiO2 nano-agglomerates were studied both experimentally and computationally. The pressure drop ...
متن کاملParticle Development in a Fluidized Bed Black Liquor Steam Reformer
Low-temperature gasification of black liquor is a new alternative to the conventional Tomlinson recovery boiler for recovering pulping chemicals and energy from black liquor in pulp and paper mills. This process can be carried out in a fluidized bed based on steam reforming at 600 C using indirect heat supplied via heat exchangers built into the fluid bed. As black liquor is injected into the b...
متن کاملEffect of co-combustion of chicken litter and coal on emissions in a laboratory-scale fluidized bed combustor
Article history: Received 1 October 2006 Received in revised form 20May 2007 Accepted 20 June 2007 Co-combustion of chicken litter (CL) with coal was performed in a laboratory-scale fluidized bed combustor to investigate the effect of CL combustion on pollutant emissions. The emissions of major gaseous pollutants including CO, SO2, H2S and NO and temperature distribution along the combustor wer...
متن کاملExperimental Study of Coating in a Bottom Sprayed Fluidized Bed
Several investigations have been devoted towards understanding the coating process in fluidized beds. Most of these studies focused on spraying liquid droplets over the bed. However, due to the complexity of these systems, more investigations are still required to quantify the effect of operating conditions on the coating criteria. The present work aims at fundamentally understanding and pr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Wear
سال: 1990
ISSN: 0043-1648
DOI: 10.1016/0043-1648(90)90039-d