Development of Al plating from 1-butylpyridinium chloride-AlCl3 molten salt electrolyte at room temperature.
نویسندگان
چکیده
منابع مشابه
Electrodeposition of Zinc From Low Temperature Molten Salt Electrolyte: Part I-Imidazole And Zinc-Chloride Electrolyte
Our R & D work was focused on the electro deposition of Zinc from imidazole as low temperature molten salt (LTMS) electrolyte with zinc chloride as a supporting salt at <100o C., without required controls from the previous existing non aqueous baths as well additive free system for the zinc deposition. Surface morphological studies and crystallographic orientation results were evaluated.
متن کاملSecondary aluminium-iron (III) chloride batteries with a low temperature molten salt electrolyte
Secondary aluminium-iron (III) chloride batteries using a low temperature molten salt electrolyte were constructed and tested. Discharge current densities were in the range 5 to 100mA ( ~ 1 to 2 0 m A c m 2 ; ~ C/4 to 5C); charging currents were 5 m A (C/4 toC/2). Utilization of the positive electrode reactant was low due to the discharge rates and loading procedure. The mode for self discharge...
متن کاملConductivity, Electrodeposition and Magnetic Property of Cobalt(II) and Dysprosium Chloride in Zinc Chloride-1-Ethyl-3-Methylimidazolium Chloride Room Temperature Molten Salt
Electric conductivity of the molten zinc chloride-1-ethyl-3-methylimidazolium chloride phases has been measured by a computerized system using the d.c. four-probes method. The sequence of the conductivities for the different component melts is ZnCl2-EMIC > ZnCl2-EMIC-CoCl2 > ZnCl2EMIC-DyCl3 > ZnCl2-EMIC-CoCl2-DyCl3. The results may be explained in terms of the viscosity increase due to the comp...
متن کاملIon-transfer voltammetry at a polarized room-temperature molten salt/water interface.
Tetraoctylammonium cation forms a room-temperature molten salt (RTMS) with 2,4,6-trinitrophenolate anion. The RTMS is immiscible with water (W) and forms a stable RTMS/W interface. It has been shown that the RTMS/W interface can be electrochemically polarized. A well-defined voltammetric wave due to the transfer of thiocyanate ion across the RTMS/W interface was observed within the potential wi...
متن کاملSurface Morphology and Microstructure of Zinc Deposit From Imidazole with Zinc Chloride Low Temperature Molten Salt Electrolyte in The Presence of Aluminium Chloride
Low temperature molten salts have variety of applications in organic synthesis, catalytic processing, batteries and electrode position due to their air and water stability. They have wide potential window for their applications in voltage and temperature and hence there is a possibility to deposit metals which could not be deposited from aqueous electrolytes. Our aim and scope of our research w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1989
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.40.548