Development of Automated Control Rod Operation Scheme for Boiling Water Reactor Startup Process.
نویسندگان
چکیده
منابع مشابه
development and implementation of an optimized control strategy for induction machine in an electric vehicle
in the area of automotive engineering there is a tendency to more electrification of power train. in this work control of an induction machine for the application of electric vehicle is investigated. through the changing operating point of the machine, adapting the rotor magnetization current seems to be useful to increase the machines efficiency. in the literature there are many approaches wh...
15 صفحه اولForsmark 1 & 2 Boiling Water Reactor Stability Benchmark Time Series Analysis Methods for Oscillation during BWR Operation Final Report
Pursuant to Article 1 of the Convention signed in Paris on 14th December 1960, and which came into force on 30th September 1961, the Organisation for Economic Cooperation and Development (OECD) shall promote policies designed: − to achieve the highest sustainable economic growth and employment and a rising standard of living in Member countries, while maintaining financial stability, and thus t...
متن کاملUasb Reactor Startup for the Treatment of Municipal Wastewater Followed by Advanced Oxidation Process
The present study was done to shorten the start-up time of up-flow anaerobic sludge blanket (UASB) reactor. Two different nutrients were used during the UASB start-up period, which was designed to decrease the hydraulic retention time (HRT) from 48 to 24 and 12 to 6 hrs at average temperatures of 25-34 oC. In the first stage, start-up was with glucose for 14 days and then the reactor was also f...
متن کاملNEDO-10527, "Rod Drop Accident Analysis For Large Boiling Water Reactors."
This report describes the current methods used by the Atomic Power Equipment Depart ment of the Genervl Electric Company for the analysis of superprompr critical nuclear excurions in lare war-rnsoderantd reactors The 7mchnical analysis tools used in studying hypothetical nuclear transients adescribed herein, without considering the probability of such an occurrence. The rod drop accident has be...
متن کاملFeedback control for optimal process operation
In chemical process operation, the purpose of control is to achieve optimal process operation despite the presence of significant uncertainty about the plant behavior and disturbances. Tracking of set-points is often required for lower-level control loops, but on the process level in most cases this is not the primary concern and may even be counterproductive. In this paper, different approache...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Atomic Energy Society of Japan / Atomic Energy Society of Japan
سال: 1992
ISSN: 0004-7120
DOI: 10.3327/jaesj.34.161