Development of Computer Simulation Method for Slip Casting Process.
نویسندگان
چکیده
منابع مشابه
Thermal Simulation of Solidification Process in Continuous Casting
In this study, a mathematical model is introduced to simulate the coupled heat transfer equation and Stefan condition occurring in moving boundary problems such as the solidification process in the continuous casting machines. In the continuous casting process, there exists a two-phase Stefan problem with moving boundary. The control-volume finite difference approach together with the boundary ...
متن کاملVehicle and Heavy Equipment Integrated Product & Process Development (IPPD) Technology Development: Casting Process Simulation
An overview is presented of the recently proposed Vehicle and Heavy Equipment Integrated Product and Process Development (IPPD) Technology Development project under the Technology Reinvestment Project (TRP) of ARPA. The goals of the tasks proposed in the manufacturing process simulation area are discussed in detail, with particular emphasis on casting. An important aspect envisioned is the inte...
متن کاملSimulation of the Stir Casting Process
Non homogeneous particle distribution is one of the greatest problems in casting Metal Matrix Composites (MMC's). To optimize some of the parameters for uniform particle distribution for batch compocasting the present simulation studies were conducted. The simulation involves visualisation experiments. In the visualisation experiments liquid and semi solid aluminium are replaced by other fluids...
متن کاملNumerical Simulation of the Investment Casting Process
Determining alloy shrinkage factors is very important for the investment casting process. Casting dimensions can be obtained from numerical simulations of heat transfer and deformation phenomena. The accuracy of the dimensional results depends on heat transfer results. In order to validate heat transfer models, temperature data were obtained during casting of aluminum alloy A356 in shell molds ...
متن کاملComputer simulation of casting process of aluminium wheels – a case study
Aluminium disc wheels intended for normal use in passenger cars are commonly produced by gravity casting. If the cooling process and the initial temperature of the mould are not well controlled, shrinkage cavity will occur after solidification, causing leakage in the disc wheel. In this research, a casting simulation software is used to simulate the casting process of aluminium wheels. The cast...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1994
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.41.293