Development of Externally Pressurized Thrust Bearing for High-Expansion-Ratio Helium Expander.
نویسندگان
چکیده
منابع مشابه
Development of Orifice-type Aerostatic Thrust Bearing for Precision Machine
Air bearings are used in precision machines and measurement equipments for recently years. Unlike conventional ball or roll bearings, there is no physical contact between the sliding surfaces and the moving surface. Therefore, the structure with air bearings can glide smoothly on the other surface to avoid generating the small particles from the friction contact and also minimize the control ef...
متن کاملμ Control of a High Speed Spindle Thrust Magnetic Bearing
Experimental results demonstrate that μ synthesis provides an excellent tool for increasing the dynamic stiffness of thrust magnetic thrust bearings. Accurate system modeling and appropriate uncertainty descriptions are critical to obtaining such results and are described in detail. Both complex μ and mixed μ synthesis were used to design controllers. The performance of the μ controllers is com...
متن کاملA study on the characteristics of externally pressurized air bearings
In this study the direct numerical method is applied to solve the perturbed Reynolds" equation. To solve it the perturbed dimensionless mass f low rate is used as the boundary condition under the inherently compensated restrictor. The dynamic characteristics of a rotor supported in the externally pressurized air bearings, such as stiffness and damping coefficients, are analyzed, and as a result...
متن کاملHigh-resolution thermal expansion measurements under helium-gas pressure.
We report on the realization of a capacitive dilatometer, designed for high-resolution measurements of length changes of a material for temperatures 1.4 K ≤ T ≤ 300 K and hydrostatic pressure P ≤ 250 MPa. Helium ((4)He) is used as a pressure-transmitting medium, ensuring hydrostatic-pressure conditions. Special emphasis has been given to guarantee, to a good approximation, constant-pressure con...
متن کاملNote: Radial-thrust combo metal mesh foil bearing for microturbomachinery.
This Note proposes a novel radial-thrust combo metal mesh foil bearing (MMFB). Although MMFBs have advantages such as higher stiffness and damping over conventional air foil bearings, studies related to MMFBs have been limited to radial MMFBs. The novel combo MMFB is composed of a radial top foil, thrust top foils, and a ring-shaped metal mesh damper--fabricated by compressing a copper wire mes...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 1992
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.58.1885