Development of Fe-34%Ni Lead Frame Alloy.
نویسندگان
چکیده
منابع مشابه
DEVELOPMENT OF HARDNESS IN A Fe- BASED NANO-COMPOSITE ALLOY
Achieving extreme hardness in the newly synthetic steel formed by converting from initial amorphous state to subse-quent crystalline structure –named as devitrification process- was studied in this research work. Results of TEM observa-tions and XRD tests showed that crystallized microstructure were made up four different nano-scale phases i.e., α-Fe, Fe 36 Cr12 Mo10 , Fe 3 C and Fe3 B. More, V...
متن کاملNew development of rapid-solidified Fe-Ga sensor/actuator alloy
Rapid-solidification method was applied to make Fe-15at%Ga and Fe-17at%Ga ribbons of 100 μm thickness. These ribbons have large magnetostriction of 270 ppm, where the coercive force exhibits a maximum value. The phenomenon is related to special metallic texture, that is, the ribbon has strongly [001]-oriented textured fine columnar microstructure with grain size of 2~5 μm. The ribbon has little...
متن کاملNanostructurization of Fe-Ni Alloy
Data about an effect of cyclic γ-α-γ martensitic transformations on the structure state of reverted austenite Fe-31.7 wt.% Ni-0.06 wt.% C alloy are presented. The effect of multiple direct γ-α and reverse α-γ martensitic transformations on fragmentation of austenitic grains has been investigated by electron microscopy and X-ray diffraction methods. An ultrafine structure has been formed by nano...
متن کاملKINETICS OF -Fe NANOCRYSTALLIZATION IN Fe55Cr18Mo7B16C4 BULK AMORPHOUS ALLOY
Abstract: In this research work, crystallization kinetics of Fe55Cr18Mo7B16C4 alloy was evaluated by X-ray diffraction, TEM observations and differential scanning calorimetric tests. In practice, crystallization and growth mechanisms were investigated using DSC tests in four different heating rates. Results showed that a two -step crystallization process occurred in the alloy in which - Fe phas...
متن کاملDevelopment of a CA-FVM Model with Weakened Mesh Anisotropy and Application to Fe–C Alloy
In order to match the growth of the decentered square and the evolution of the interface cell in a two-dimensional cellular automaton-finite volume method (CA-FVM) model with decentered square algorithm, the present work first alters the determination of the half length of the square diagonal according to the preferential growth orientation, and then modifies the interface evolution considering...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: DENKI-SEIKO[ELECTRIC FURNACE STEEL]
سال: 1993
ISSN: 1883-4558,0011-8389
DOI: 10.4262/denkiseiko.64.296