Development of Flexible and Conductive Immiscible Thermoplastic/Elastomer Monofilament for Smart Textiles Applications Using 3D Printing
نویسندگان
چکیده
منابع مشابه
Flexible Photovoltaic Textiles for Smart Applications
In recent years alternative renewable energies including that obtained by solar cells have attracted much attention due to exhaustion of other conventional energy resources especially fossil-based fuels. Photovoltaic energy is one of the cleanest, most applicable and promising alternative energy using limitless sun light as raw material. Even though, inorganic solar cells dominate in the world ...
متن کاملdevelopment of different optical methods for determination of glucose using cadmium telluride quantum dots and silver nanoparticles
a simple, rapid and low-cost scanner spectroscopy method for the glucose determination by utilizing glucose oxidase and cdte/tga quantum dots as chromoionophore has been described. the detection was based on the combination of the glucose enzymatic reaction and the quenching effect of h2o2 on the cdte quantum dots (qds) photoluminescence.in this study glucose was determined by utilizing glucose...
Inkjet4Tex: Creative implications of 3D inkjet printing technologies for textiles
This project expands future applied-design capabilities for textiles as a function of inkjet deposition technology. The project investigates 3D inkjet rapid-production tools’ potential, focusing on creative gaps in the developing technology in its application to the textile design process. As such, the research investigates future design possibilities for inkjet printing technology in the creat...
متن کاملDispenser printing of electrochromic display on textiles for creative applications
Techset Com For the first time, the design, fabrication and testing of a dispenserprinted electrochromic (EC) display on fabric using Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) as the EC material are reported. The entire display is based on a lateral structural design in which the electrodes are located adjacent to each other in the same plane. The display is directly p...
متن کامل3D Printing of Transparent and Conductive Heterogeneous Hydrogel-Elastomer Systems.
A hydrogel-dielectric-elastomer system, polyacrylamide and poly(dimethylsiloxane) (PDMS), is adapted for extrusion printing for integrated device fabrication. A lithium-chloride-containing hydrogel printing ink is developed and printed onto treated PDMS with no visible signs of delamination and geometrically scaling resistance under moderate uniaxial tension and fatigue. A variety of designs ar...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymers
سال: 2020
ISSN: 2073-4360
DOI: 10.3390/polym12102300