Development of high efficiency Versatile Arc Discharge Ion Source at CERN ISOLDE
نویسندگان
چکیده
منابع مشابه
Cern Ps Laser Ion Source Development
CERN, together with ITEP and TRINITI (Russia), is developing a CO2 laser ion source. The key design parameters are: 1.4×10 ions of Pb in a pulse of 5.5 μs, with a 4-rms emittance of 0.2×10 rad m, working at a repetition rate of 1 Hz. This device is considered as one candidate source for LHC heavy ion operation. The status of the laser development, the experimental set-up of the source consistin...
متن کاملStatus of the CO2 Laser Ion Source at CERN
A laser ion source using a CO2 laser focused onto a solid target is under study at CERN for the production of high currents of highly-charged heavy ions, for possible use in the pre-injector for LHC. A new expansion and extraction layout was installed in this test facility, improving the alignment and making the target to extraction distance more flexible. A two solenoid beam transport system w...
متن کاملBeam Dynamics Studies for the Hie-isolde Linac at Cern
The upgrade of the normal conducting (NC) Radioactive Ion Beam EXperiment (REX)-ISOLDE heavy ion accelerator at CERN, under the High Intensity and Energy (HIE)ISOLDE framework, proposes the use of superconducting (SC) quarter-wave resonators (QWRs) to increase the energy capability of the facility from 3 MeV/u to beyond 10 MeV/u. A beam dynamics study of a lattice design comprising SC QWRs and ...
متن کاملDevelopment of an Ionization Scheme for Gold using the Selective Laser Ion Source at the On-Line Isotope Separator ISOLDE
At the ISOLDE on-line isotope separation facility, the resonance ionization laser ion source (RILIS) can be used to ionize reaction products as they effuse from the target. The RILIS process of laser step-wise resonance ionization of atoms in a hot metal cavity provides a highly element selective stage in the preparation of the radioactive ion beam. As a result, the ISOLDE mass separators can p...
متن کاملBernas ion source discharge simulation.
As the technology and applications continue to grow up, the development of plasma and ion sources with clearly specified characteristic is required. Therefore comprehensive numerical studies at the project stage are the key point for ion implantation source manufacturing (especially for low energy implantation). Recently the most commonly encountered numerical approach is the Monte Carlo partic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Review of Scientific Instruments
سال: 2010
ISSN: 0034-6748,1089-7623
DOI: 10.1063/1.3271245