Development of High-goethite Ore Self-densification Sintering Process
نویسندگان
چکیده
منابع مشابه
On the self-damping nature of densification in photonic sintering of nanoparticles
Sintering of nanoparticle inks over large area-substrates is a key enabler for scalable fabrication of patterned and continuous films, with multiple emerging applications. The high speed and ambient condition operation of photonic sintering has elicited significant interest for this purpose. In this work, we experimentally characterize the temperature evolution and densification in photonic sin...
متن کاملProbing the densification mechanisms during flash sintering of ZnO
Using ZnO as a model system, the densification mechanisms of flash sintering are investigated. Controlled experiments via limiting the maximum current or the effective ramp rate suggest that both the maximum specimen temperature and the high heating rate (on the order of 200 C/s) are essential for the rapid densification during the flash sintering. Moreover, benchmarking rapid thermal annealing...
متن کاملInfluence of Preformation Process on Combustibility of Biochar and its Application in Iron Ore Sintering
A study was carried out into the use of preformation process to prepare biochar for replacing coke breeze in iron ore sintering. Two types of preformation process, thermo-compression process (TCP) and normal temperature process (NTP), were adopted. Results show that preformation contributed to improving the density of both raw biomass and biochar. Recommended preformation parameters for TCP wer...
متن کاملFull densification of Molybdenum powders using Spark Plasma Sintering
Pure molybdenum powder was sintered using Spark Plasma Sintering under various temperatures, and holding times, under a pressure of 77 MPa and a heating rate at 700°C/min. After sintering, a carbide layer was observed at the surface. The carbide layer thickness, the relative density of the sample as well as the microhardness and the grain size of Mo were measured. The carbide thickness depends ...
متن کاملFinite element simulation of pyroplastic deformation, anisotropic shrinkage and heterogeneous densification for ceramic materials during liquid phase sintering process
Pyroplastic deformation is a distortion of the ceramic shape during the sintering process. It occurs because the flow of the vitreous phase at high temperature and the applied stress due to the weight of the product during sintering process. The aim of this paper deals with describing a numerical-experimental method to evaluate the pyroplastic deformation, to predict the anisotropic shrinkage a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1992
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.78.7_1021