DEVELOPMENT OF HIGH STRENGTH REINFORCED CONCRETE FLAT BEAM SYSTEM

Shear Capacity of Reinforced Concrete Flat Slabs Made with High-strength Concrete: A Numerical Study of the Effect of Size, Location, and Shape of the Opening (TECHNICAL NOTE)

Nowadays, concrete with strength higher than 50 MPa is utilized due to the ever increasing need for higher strength and prolonged healing properties. Despite the widespread use of high-strength concrete, only a few research projects have been conducted on the punching shear strength of high-strength concrete slabs. Reinforced concrete flat slabs are widely employed in structural systems. The lo...

Strength Development and Water Permeability of Steel Fibre Reinforced Concrete

Research reported in this paper was carried to study the water permeability of steel fibre reinforced concrete (SFRC) with varied aspect ratios of steel fibres. Corrugated steel fibres were used in the investigation at constant fibre content of 0.5%. Relationship of water permeability with compressive strength and split tensile strengths has been presented. The water permeability was observed t...

Forecasting of Shear Strength of Concrete Beam Reinforced with FRP Bar

This study develops a new approach for forecasting shear Strength of concrete beam without stirrups based on the artificial neural networks (ANN). Proposed ANN considers geometric and mechanical properties of cross section and FRP bars, and shear span-depth ratio. The ANN model is constructed from a set of experimental database available in the past literature. Efficiency of the ANN model was c...

Development of High-strength Self-consolidating Concrete

Experimental investigation of the strength of glass fiber-reinforced concrete exposed to high temperature

This study investigated the effects of high temperature exposure on the compressive, tensile, and flexural strengths of concrete containing glass fiber. A total of 108 cubic specimens (150 mm × 150 mm × 150 mm), cylindrical specimens (300 mm × 150 mm), and prismatic specimens (500 mm × 150 mm × 150 mm) were prepared for compressive, tensile, and flexural strength testing, respectively. The spec...