Development of Photocatalytically Active Anodized Layers by a Modified Phosphoric Acid Anodizing Process for Air Purification

Purification of Wet Process Phosphoric Acid by Solvent Extraction using Cyclohexanol

Solvent extraction using organic solvents is an important technology for the purification of wet process phosphoric acid (WPA). In this study, the purification process of WPA, using a new type of solvent extraction system, cyclohexanol diluted in kerosene, was investigated. The equilibrium phase diagram of the system H3PO4 H2Osolvent mixtures at 313.2K was obtained. The effects of extraction ...

a study on thermodynamic models for simulation of 1,3 butadiene purification columns

attempts have been made to study the thermodynamic behavior of 1,3 butadiene purification columns with the aim of retrofitting those columns to more energy efficient separation schemes. 1,3 butadiene is purified in two columns in series through being separated from methyl acetylene and 1,2 butadiene in the first and second column respectively. comparisons have been made among different therm...

Nanofiltration Membranes Modified with Aromatic Polyamide Dendrimers Active Layers By

Anodizing color coded anodized Ti6Al4V medical devices for increasing bone cell functions

Current titanium-based implants are often anodized in sulfuric acid (H(2)SO(4)) for color coding purposes. However, a crucial parameter in selecting the material for an orthopedic implant is the degree to which it will integrate into the surrounding bone. Loosening at the bone-implant interface can cause catastrophic failure when motion occurs between the implant and the surrounding bone. Recen...

A Low Cost Method for Manufacturing of Aluminum / Alumina Composite by Anodizing and CRB Process :

A Low Cost Method for Manufacturing of Aluminum/Alumina Composite by Anodizing and CRB Process: Roohollah Jamaati1; Mohammad Reza Toroghinejad1; E. Zahrani1; 1Isfahan University of Technology In this work, Al/Al2O3 composite strips are manufactured by a low cost method consist cold roll bonding (CRB) process of anodized aluminum strips. This technique has the flexibility to control the volume f...