Development of Photosensitive Porous Polyimide with Low Dielectric Constant.
نویسندگان
چکیده
منابع مشابه
Porous Polyimide Membranes Prepared by Wet Phase Inversion for Use in Low Dielectric Applications
A wet phase inversion process of polyamic acid (PAA) allowed fabrication of a porous membrane of polyimide (PI) with the combination of a low dielectric constant (1.7) and reasonable mechanical properties (Tensile strain: 8.04%, toughness: 3.4 MJ/m3, tensile stress: 39.17 MPa, and young modulus: 1.13 GPa), with further thermal imidization process of PAA. PAA was simply synthesized from purified...
متن کاملControl capability of electrolytic concentration on refractive index and dielectric constant of porous Silicon layers
Porous Silicon (PS) samples have been prepared by electrochemical anodization of p-type silicon wafer by varying HF concentrations in the electrolytic solution. The structural, surface morphological, optical and surface composition analysis of the prepared samples were done by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Photoluminescence (PL) and Fourier transform infr...
متن کاملControl capability of electrolytic concentration on refractive index and dielectric constant of porous Silicon layers
Porous Silicon (PS) samples have been prepared by electrochemical anodization of p-type silicon wafer by varying HF concentrations in the electrolytic solution. The structural, surface morphological, optical and surface composition analysis of the prepared samples were done by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Photoluminescence (PL) and Fourier transform infr...
متن کاملFabrication of Polyimide Porous Nanostructures for Low-k Materials
The processing speeds of microchips continue to increase as integration densities increase in the semiconductor industry. When the device size is decreased, the so-called resistance– capacitance (RC) delay and the crosstalk noise between metal interconnects offset any gain in chip performance. To avoid these undesirable phenomena, lower dielectric insulating layers must be employed. In the near...
متن کاملSolution-Processed Photosensitive Passivation Layer for an a-Si TFT for LCDs with a Low Dielectric Constant
A solution-processed photosensitive passivation layer with a low dielectric constant (PPLD) has been developed for an a-Si thin film transistor. The PPLD has three highly important properties: a low leakage current, low water absorption, and high-transparency. In addition to providing passivation, the PPLD doubles as a planarization layer. The photoactive property of the PPLD is convenient for ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Photopolymer Science and Technology
سال: 2002
ISSN: 0914-9244,1349-6336
DOI: 10.2494/photopolymer.15.159