Development of Rapid Debinding Process and Debinding Behavior for Zirconia Molded Bodies Using Superheated Steam
نویسندگان
چکیده
منابع مشابه
Numerical and Experimental Investigation of Thermal Debinding
Powder injection molding (PIM) is an important netshape manufacturing process and has received much attention. One of the most critical steps in PIM process is debinding. It consumes a major part of the processing time. Failure of the powder compact often results if the process is accelerated. Thermal debinding is a common methodology for the final removal of residual polymer from a PIM compact...
متن کاملUsing Superheated Steam in Drying and Sterilization
Botanicals are received in whole, non-sterile form. BI Nutraceuticals sterilizes, mills, and packages the ingredient in sturdy, safe containers before shipping to customers. Photo courtesy of BI Nutraceuticals Using Superheated Steam in Drying and Sterilization It seems counterintuitive to use water vapor in a process to remove water or to heat materials that can be damaged by moisture, but suc...
متن کاملdevelopment of different optical methods for determination of glucose using cadmium telluride quantum dots and silver nanoparticles
a simple, rapid and low-cost scanner spectroscopy method for the glucose determination by utilizing glucose oxidase and cdte/tga quantum dots as chromoionophore has been described. the detection was based on the combination of the glucose enzymatic reaction and the quenching effect of h2o2 on the cdte quantum dots (qds) photoluminescence.in this study glucose was determined by utilizing glucose...
Thermal Processing of Injection-Molded Silicon Carbide
Silicon carbide is the most important and versatile non-oxide ceramic. Powder injection molding (PIM) is a method of high-speed fabrication of complex near-net shapes of SiC and other powders. Green micro-machining (GMM) is used to extend the shaping capability of green ceramics and powder metallurgy to smaller feature sizes. Debinding—removal of organic additives—is the rate-limiting step in P...
متن کاملCrystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies
In-situ alumina-zirconia composite bodies were fabricated by heat treatment of gibbsite-zircon-kaolinite mixture at 1450℃. The current research investigated crystallization behavior and mechanical properties of the mentioned mixture in the presence of 5 wt.% MgO as an additive. X-ray diffraction (XRD) results showed that alumina, zirconia, and magnesium aluminosilicate were crystallized during ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Powder Technology, Japan
سال: 2020
ISSN: 0386-6157,1883-7239
DOI: 10.4164/sptj.57.619