Development of Recycling Technology for Scallop Waste by Hydrometallurgical Process

Willingness of end users to pay for e-waste recycling

BACKGROUND AND OBJECTIVES: The sheer volume of electrical and electronic waste (e-waste) has presently been generated in Vietnam, posing a growing concern regarding its impact can have on the environment and human health. Therefore, the need for developing policies and regulations towards the environmentally sound management of e-waste is becoming crucial. Although the municipa...

Dissolution Process Modeling for Recycling Different Metals from Solid Waste

chemical recycling of polycarbonate waste using conventional heating and microwave assisted method

پلی کربنات یکی از پلاستیکهای مهمی است که به صورت گسترده در تولید لوحهای فشرده، قطعات رایانه، مواد ساختمانی و غیره مورد استفاده قرار می گیرد. این پلیمر بصورت عمده از تراکم مونومر بیس فنولa (bpa) و کربنیل کلرید یا دی متیل کربنات ها بدست می آید. در سالهای اخیر بازیافت شیمیایی پلی کربنات بیشتر مورد توجه بوده است. بازیافت شیمیایی پلی کربنات برای بدست آوردن مواد اولیه آن با روشهای متفاوتی مانند تجزی...

Advances towards a Clean Hydrometallurgical Process for Chromite

Because of the acute toxicity of Cr(VI)-bearing substances, the pollution problem caused by chromite process residue has become a worldwide concern. In the view of relevant studies, the technologies based on the alkali treatment cannot fundamentally resolve the pollution problem, because the oxidation of Cr(III) to Cr(VI) is unavoidable during chromite decomposition. In contrast, the oxidation ...

Novel waste printed circuit board recycling process with molten salt

The objective of the method was to prove the concept of a novel waste PCBs recycling process which uses inert, stable molten salts as the direct heat transfer fluid and, simultaneously, uses this molten salt to separate the metal products in either liquid (solder, zinc, tin, lead, etc.) or solid (copper, gold, steel, palladium, etc.) form at the operating temperatures of 450-470 °C. The PCB rec...