Development of SiC-Composite-PM Aluminum Alloy Piston.
نویسندگان
چکیده
منابع مشابه
Effects of Various Ageing Heat Treatments on Microstructural Features and Hardness of Piston Aluminum Alloy
Piston aluminum alloys have different intermetallic phases, such as Cu3Al, Mg2Si ,and AlNi phases. The morphology and the distribution of such phases have important roles on mechanical properties of the piston material. Therefore, in this research, various ageing heat treatments on the mentioned material were done and the microstructural feature and the hardness were studi...
متن کاملDEVELOPMENT OF HARDNESS IN A Fe- BASED NANO-COMPOSITE ALLOY
Achieving extreme hardness in the newly synthetic steel formed by converting from initial amorphous state to subse-quent crystalline structure –named as devitrification process- was studied in this research work. Results of TEM observa-tions and XRD tests showed that crystallized microstructure were made up four different nano-scale phases i.e., α-Fe, Fe 36 Cr12 Mo10 , Fe 3 C and Fe3 B. More, V...
متن کاملFast Anodizing of Aluminum Piston Heads
Hard anodizing of aluminum piston heads for internal combustion engines Is usually performed by immersion, with a time ranging from 40 to 50 minutes. This paper wii i present a new process, based on specially adapted hydrodynamics of the electrolyte, applying electrolysis parameter values outside the usual range and which greatly reduce the treatment time. In addition to applications to other c...
متن کاملEvaluation of continuum damage at different temperatures for aluminum-silicon alloy of engine piston within low-cycle fatigue regime
In this article, the isothermal low-cycle fatigue continuum damage in the engine piston aluminum alloy has been evaluated at different temperatures. For this objective, experimental data of low-cycle fatigue tests on standard specimens were used at 280, 350 and 425°C. Based on the continuum damage mechanics method, the fatigue damage was calculated during cyclic loading. Obtained results, inclu...
متن کاملEFFECT OF AGING CONDITION ON STRUCTURE AND THE PROPERTIES OF Al-ALLOY / SiC COMPOSITE
The heat treatments have been designed to vary the matrix microstructure in P/M processed SiC reinforced 7xxx Aluminum alloys to determine the effects of matrix microstructure, interface behavior on the mechanical properties. Smooth tensile, notched bend tests were performed. The results conclude that the clustered regions have been observed as preferred initiation sites in both tensile and not...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1999
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.46.519