Development of technological process of metal machining from stamping on 5-axis CNC milling machine
نویسندگان
چکیده
The technological process of compressor working blade production from stamping with minimum allowance for machining the part, on 5-axis CNC machine aimed at reducing units equipment has been developed. tooling basing part principle six-point adapted to design tool is realised. geometrical parameters obtained were analysed its mathematical model by 3D scanning method.
منابع مشابه
Ruled Surface Machining on Five-Axis CNC Machine Tools
To achieve high precision and high productivity in machining sculptured surfaces, a new architecture for a five-axis CNC interpolator for machining ruled surfaces was developed and demonstrated on a milling machine. The objective of the five-axis interpolator is to continuously maintain the milling cutter axis in parallel with the straight lines of the ruled surface. The cutter position and ori...
متن کاملOptimization of 5-Axis Milling Processes Based on the Process Models with Application to Airfoil Machining
L.T. Tunc , E. Budak * Sabanci University, Faculty of Engineering and Natural Sciences, Istanbul-Turkiye * [email protected] Abstract 5-axis milling is widely used in machining of complex surfaces such as airfoils. Improper selection of machining parameters may cause low productivity and undesired results during machining. There are several constraints such as available power and torque, c...
متن کاملTractrix-based tool orientation control for 5-axis CNC machining
We consider a 5-axis CNC machine whose tool axis maintains a fixed angle with respect to the surface normal as the machine tool cuts a given path on a smooth surface. The tool axis a(ξ) lies on a cone of constant angle ψ about the surface normal n(ξ) at each point of the path, but its azimuthal position on this cone remains indeterminate. Geometrically speaking, given a curve n(ξ) on the unit s...
متن کاملPrecise gouging-free tool orientations for 5-axis CNC machining
We present a precise approach to the generation of optimized collision-free and gouging-free tool paths for 5-axis CNC machining of freeform NURBS surfaces using flat-end and rounded-end (bull nose) tools having cylindrical shank. To achieve high approximation quality, we employ analysis of hyper-osculating circles (HOC) [26, 27], that have third order contact with the target surface, and lead ...
متن کامل-axis CNC machining of sculptured parts
As an innovative and cost-effective method for carrying out multiple-axis CNC machining, 3 1 2 1 2 -axis CNC machining technique adds an automatic indexing/rotary table with two additional discrete rotations to a regular 3-axis CNC machine, to improve its ability and efficiency for machining complex sculptured parts. In this work, a new tool path generation method to automatically subdivide a c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S web of conferences
سال: 2023
ISSN: ['2555-0403', '2267-1242']
DOI: https://doi.org/10.1051/e3sconf/202341304018