Development of Texture Control Technique for Precipitation-Hardened Copper Alloys

Copper Precipitation Hardened, High Strength, Weldable Steel

Steel containing 0.03% carbon, 1.35% copper and 0.84% nickel had yield strength in the 540-625 MPa (78-90 Ksi) range depending on thickness, ultimate tensile strength in the 625-690 MPa (90100 Ksi) range, and 25-30% elongation when air cooled after hot rolling. No brittle heat-affected zone was formed during manual or automatic submerged arc welding without pre-heating or postheating. The fract...

Mechanical Behavior of Precipitation Hardened Aluminum Alloys Welds

development and implementation of an optimized control strategy for induction machine in an electric vehicle

in the area of automotive engineering there is a tendency to more electrification of power train. in this work control of an induction machine for the application of electric vehicle is investigated. through the changing operating point of the machine, adapting the rotor magnetization current seems to be useful to increase the machines efficiency. in the literature there are many approaches wh...

Effect of particle size distribution on strength of precipitation-hardened alloys

Aging of precipitation hardened alloys results in particle coarsening, which in turn affects the strength. In this study, the effect of particle size distribution on the strength of precipitation-hardened alloys was considered. To better represent real alloys, the particle radii were distributed using the Wagner and Lifshitz and Slyozov (WLS) particle size distribution theory. The dislocation m...

Temperature Effects on the Tensile Properties of Precipitation-Hardened Al-Mg-Cu-Si Alloys

Because the mechanical performance of precipitation-hardened alloys can be significantly altered with temperature changes, understanding and predicting the effects of temperatures on various mechanical properties for these alloys are important. In the present work, an analytical model has been developed to predict the elastic modulus, the yield stress, the failure stress, and the failure strain...