Development of vegetable oil-based conducting rigid PU foam
نویسندگان
چکیده
منابع مشابه
Effects of Perforation on Rigid PU Foam Plates: Acoustic and Mechanical Properties
Factories today are equipped with diverse mechanical equipment in response to rapid technological and industrial developments. Industrial areas located near residential neighborhoods cause massive environmental problems. In particular, noise pollution results in physical and psychological discomfort, and is a seen as invisible and inevitable problem. Thus, noise reduction is a critical and urge...
متن کاملNonlinear Optical Properties of Rigid Polyurethane Foam/SiO2 Nanocomposite
Polyurethane closed cell (PUCC)/SiO2 nanocomposites have been prepared by using in situ polymerization approach. The third-order optical nonlinearities of PUCC/SiO2 nanocomposites, dissolved in DMF are characterized by Z-scan technique at the measurement wavelength of 532 nm. The nonlinear refractive (NLR) indices and nonlinear absorption (NLA) coefficients of samples were calculated from close...
متن کاملOil foam interaction
Foam injection is a promising method to improve sweep efficiency for gas flooding in enhanced oil recovery (EOR). The effect of oil on foam is a complex phenomenon and for this reason three phase foam simulations have shown to be difficult in the past. Initially the objective of this simulation study was getting a better understanding of relating composition paths for foam displacements on the ...
متن کاملOxidation and low temperature stability of vegetable oil-based lubricants
Vegetable oils are promising candidates as base fluid for eco-friendly lubricants because of their excellent lubricity, biodegradability, viscosity–temperature characteristics and low volatility. Their use, however, is restricted due to low thermo-oxidative stability and poor cold flow behavior. This paper presents a systematic approach to improve the oxidation behavior and low temperature flui...
متن کاملBiodegradation Behavior of Some Vegetable Oil-based Polymers
The potential biodegradability of several vegetable oil-based polymers was assessed by respirometry in soil for 60–100 days at temperatures of 30–58 C. Films of soybean oil and linseed oil which were oxidatively polymerized (Co catalyst) on a kraft paper support were 90%–100% mineralized to CO2 after 70 days at 30 C. Mineralization of polymerized tung oil to CO2 was much slower than soy or lins...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: e-Polymers
سال: 2019
ISSN: 1618-7229,2197-4586
DOI: 10.1515/epoly-2019-0042