Device for Making Horizontal Wedge Thrust of Rolling Stand
نویسندگان
چکیده
منابع مشابه
PPT Thrust Stand
A torsional-type thrust stand has been designed and built to test Pulsed Plasma Thrusters (PPTs) in both single shot and repetitive operatingmodes. Using this stand, momentum per pulse was determined strictly as a function of thrust stand deflection, spring stiffness, and natural frequency. No empirical corrections were required. The accuracy of the method was verified using a swinging impact p...
متن کاملA μNewton thrust-stand for LISA
The success of the LISA project depends on the ability of the disturbance reduction system to shield the proof masses from all external forces and maintain tight pointing requirements relative to the other two spacecrafts. μN-thrusters are required to compensate for the solar radiation pressure acting on the spacecraft. The force noise from these thrusters must be low enough to not disturb the ...
متن کاملThrust stand for vertically oriented electric propulsion performance evaluation.
A variation of a hanging pendulum thrust stand capable of measuring the performance of an electric thruster operating in the vertical orientation is presented. The vertical orientation of the thruster dictates that the thruster must be horizontally offset from the pendulum pivot arm, necessitating the use of a counterweight system to provide a neutrally stable system. Motion of the pendulum arm...
متن کاملAn Inverted-Pendulum Thrust Stand for High-Power Electric Thrusters∗
The inverted-pendulum method of thrust measurement for high-power electric thrusters is described analytically and experimentally. Two sources of uncertainty in the thrust measurements are investigated: those due to changes in the sensitivity of the inverted pendulum and those due to tare forces resulting from thermal stresses and electromagnetic forces acting on the flexural elements. An ideal...
متن کاملA 10 nN resolution thrust-stand for micro-propulsion devices.
We report on the development of a nano-Newton thrust-stand that can measure up to 100 μN thrust from different types of microthrusters with 10 nN resolution. The compact thrust-stand measures the impingement force of the particles emitted from a microthruster onto a suspended plate of size 45 mm × 45 mm and with a natural frequency over 50 Hz. Using a homodyne (lock-in) readout provides strong ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2017
ISSN: 2261-236X
DOI: 10.1051/matecconf/201710603002