Devitrification of rapidly quenched Al-Cu-Ti amorphous alloys
نویسندگان
چکیده
منابع مشابه
Corrosion Characteristics of a - Ti and Ti 2 Cu Composing Ti - Cu Alloys
A series ef binary Ti-Cu alloys containing 5-20 mass% Cu was prepared, and the corresien behavior of a-Ti and Ti2Cu composing the Ti-Cu alloys were examined based on the anodic polarization curves and released iens in O.9% NaCl and 1% lactic acid solutions. In both selutions, the Ti-Cu alloys showed the same anodic polarization curves as titanium in the conditien below 1.4 V. Hewever, precipita...
متن کاملMachinability of Experimental Ti-Cu Alloys
This study is an investigation of the machinability of experimental Ti-Cu alloys (2, 5, and 10mass% Cu) as new dental titanium alloy candidates for CAD/CAM use. The alloys were slotted with a vertical milling machine and carbide square end mills under two cutting conditions. Their machinability was evaluated through cutting force using a three-component force transducer fixed on the table of th...
متن کاملQUANTITATIVE STUDY OF Sb GRAIN BOUNDARY SEGREGATION IN RAPIDLY QUENCHED Cu-Sb ALLOYS
In the present work, we used Cu-Sb alloy system as a model to study grain boundary segregation in specimens prepared by rapid quenching. Ribbons of Cu-Sb alloys of single Cu phase and polycrystalline structure containing 0.01, 0.08, and 2wt% Sb prepared by single roller melt spinning were used as specimens, and the segregation was studied by using energy dispersive X-ray spectrometer attached t...
متن کاملElemental separation in nanocrystalline Cu-Al alloys
Y. B. Wang, X. Z. Liao, Y. H. Zhao, J. C. Cooley, Z. Horita, and Y. T. Zhu School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney, Sydney, NSW 2006, Australia School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094, China Division of Materials Science and Technology, Los Alamos National Laboratory, Los Alamos, New ...
متن کاملDIFFICULTIES IN GRAIN REFINING ALUMINUM LITHIUM ALLOYS USING COMMERCIAL Al-Ti AND Al-Ti-Bor MASTER ALLOYS
High strength aluminum alloys, especially those containing zirconium, are historically difficult to grain refine. Early efforts by Alcoa indicated that the addition of lithium to these alloys increases difficulty with grain refinement. Although grain refining of alloys 2090 and 2091 was possible, consistent results were not obtained. Statistically-designed experiments were used to quickly ident...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Materials Science
سال: 2003
ISSN: 0250-4707,0973-7669
DOI: 10.1007/bf02707356