DIESEL CONVERSION MAXIMIZATION IN A FT MULTI-BED REACTOR
نویسندگان
چکیده
منابع مشابه
Trimetallic Au-Cu-La/AC for Acetylene Hydrochlorination in a Multi-Tubular Fixed Bed Reactor
The metal chloride of LaCl3 was chosen to modify the Au-Cu/AC to decrease the noble metal of gold and enhance the catalytic performances. Then a mercury-free catalyst of Au-Cu-La/AC was prepared by the impregnation method, and the fresh Au-Cu-La/AC and Au-Cu/AC catalysts were also characteri...
متن کاملControl of a Fluidized Bed Polyethylene Reactor
In present paper, dynamic behavior and control of a fluidized bed reactor for polyethylene production has been considered. A double active sites model for Ziegler-Natta catalysts is used for simulation of polymerization reaction. Hydrodynamic behavior of the bed is modeled using a two phase model including bubble and emulsion phases in which bubble phase has plug flow pattern with different...
متن کاملStyrene Biofiltration in a Trickle-Bed Reactor
The biological treatment of styrene waste gas in a trickle–bed filter (TBF) was investigated. The bioreactor consisted of a two-part glass cylinder (ID 150 mm) filled with 25 mm polypropylene Pall rings serving as packing material. The bed height was 1m. Although the laboratory temperature was maintained at 22 °C, the water temperature in the trickle–bed filter was slightly lower (about 18 °C)....
متن کاملProfit Maximization Based on Customer Satisfaction Level in a Multi- Layer Multi-Product Supply Chain
This paper concerns with a mathematical model considering customer satisfaction requirements in a supply chain. The model tradeoffs the supply chain ability to fulfill the customers’ requirements and the limited budget in a variety of production phases. The decisions made here help to determine the profit provider price and economic quantity while the effective supplier and priori requireme...
متن کاملConversion of Diesel Engine to Port Injection CNG Engine Using Gaseous Injector Nozzle Multi Holes Geometries Improvement: A Review
This paper is the representation of the computational and experimental methods of a new injector nozzle for a sequential port injection CNG engine. The objective of this study was to review the previous research in the development of gaseous fuel injector for port injection CNG engine converted from diesel engine. Next, a simulation of the fuel flow of the new injector nozzle was made using FLU...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Latin American Applied Research - An international journal
سال: 2019
ISSN: 1851-8796,0327-0793
DOI: 10.52292/j.laar.2019.336