Diffusion barrier property of electroless Ni-W-P coating in high temperature Zn-5Al/Cu solder interconnects
نویسندگان
چکیده
منابع مشابه
Investigation of interfacial reactions between Sn–Zn solder with electrolytic Ni and electroless Ni(P) metallization
In this study, interfacial reactions of electrolytic Ni and electroless Ni(P) metallization of the ball-grid-array (BGA) substrate with the molten n–9Zn (wt.%) eutectic solder alloy were investigated, focusing on the shear strengths and the identification of the intermetallic compound IMC) phases at various reflow periods. Zn-containing Pb-free solder alloys were kept in molten condition (240 ◦...
متن کاملCorrosion Behaviour of High-Mn TWIP Steels with Electroless Ni-P Coating
An attempt has been taken to improve the corrosion resistance of twinning-induced plasticity (TWIP) steels (Fe-25Mn and Fe-25Mn-3Al) by electroless Ni-P coating. Corrosion resistance in 3.5% NaCl and 0.1M H2SO4 solutions was characterized by the potentiodynamic polarization curves and Tafel method calculations. It was found that Ni-P coating improved the corrosion resistance by the factor of 4 ...
متن کاملElectroless Ni–P composite coatings
This review outlines the development of electroless Ni–P composite coatings. It highlights the method of formation, mechanism of particle incorporation, factors influencing particle incorporation, effect of particle incorporation on the structure, hardness, friction, wear and abrasion resistance, corrosion resistance, high temperature oxidation resistance of electroless Ni–P composite coatings ...
متن کاملInterfacial Reactions Between Sn–58 mass%Bi Eutectic Solder and (Cu, Electroless Ni–P/Cu) Substrate
The growth kinetics of intermetallic compound layers formed between eutectic Sn–58Bi solder and (Cu, electroless Ni–P/Cu) substrate were investigated at temperature between 70 and 120◦C for 1 to 60 days. The layer growth of intermetallic compound in the couple of the Sn–58Bi/Cu and Sn–58Bi/electroless Ni–P system satisfied the parabolic law at given temperature range. As a whole, because the va...
متن کاملFabrication and Characterization of Nanostructure Functionally Graded Ni-P Electroless Coating
In this research, novel functionally graded Ni-P coating was deposited with electroless process. The content of phosphorus was controlled to change gradual through the thickness of the coating. During the plating, bath temperature and pH were changed at specified intervals to obtain functionally graded structure. To compare the properties of functionally graded coating with Ni-P single-layer co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Alloys and Compounds
سال: 2017
ISSN: 0925-8388
DOI: 10.1016/j.jallcom.2017.06.122