Diffusion in Bimetal Vapor‐Solid Couples
نویسندگان
چکیده
منابع مشابه
Temperature Insensitive Curved Bimetal Elements
Space structures are subjected to appreciable temperature variations when they enter and leave direct solar radiation zones. These variations cause thermal strains and related structural distortions. Such deformations are often a nuisance and much engineering e ort, such as active control methods, is currently being invested in reducing the deformations and alleviating their e ects. This paper ...
متن کاملSupercooled melting in multicomponent Zr–Al–Cu–Ni diffusion couples
Diffusion couples combining a hcp Zr90Al10 supersaturated solid solution with a fcc Cu64Ni36 solid solution were annealed at 410 °C for different times. The reaction at the interface was investigated by transmission electron microscopy and energy dispersive x-ray spectroscopy. The investigations show the formation of a noncrystalline layer at the interface between the two solid solutions that g...
متن کاملA Continuum Theory That Couples Creep and Self - Diffusion
In a single-component material, a chemical potential gradient or a wind force drives self-diffusion. If the self-diffusion flux has a divergence, the material deforms. We formulate a continuum theory to be consistent with this kinematic constraint. When the diffusion flux is divergence-free, the theory decouples into Stokes’s theory for creep and Herring’s theory for self-diffusion. A length em...
متن کاملIn situ visualization of metallurgical reactions in nanoscale Cu/Sn diffusion couples.
The Cu-Sn metallurgical soldering reaction in two-segmented Cu-Sn nanowires is studied by in situ transmission electron microscopy. By varying the relative lengths of Cu and Sn segments, we show that the metallurgical reaction results in a Cu-Sn solid solution for small Sn/Cu length ratio while Cu-Sn intermetallic compounds (IMCs) for larger Sn/Cu length ratios. Upon heating the nanowires to ∼5...
متن کاملEffect of Cladding Parameters on the Hardness of Bimetal Plates
R.Bęczkowski, Institute of Mechanical Technology, Czestochowa University of Technology, Poland Hardness is one of the components responsible for the resistance to wear. The development of new materials with hardness surface more than 65 HRC is possible with use welding technologies. High chromium cored wires belong to welding materials that are often used to cladding to protect surface. This ar...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Physics
سال: 1954
ISSN: 0021-8979,1089-7550
DOI: 10.1063/1.1721698