Diffusion Layer of Electroplated Chromium on Iron
نویسندگان
چکیده
منابع مشابه
On the magnetism of iron in chromium
2014 The magnetic properties of iron in chromium and in chromium rich alloys are tentatively interpreted in terms of a local coupling with the spin modulation of the matrix. The Curie Weiss behaviour of isolated iron atoms in the transversal uncommensurate phase is related to possible long range distortions of the spin modulation due to the thermal motion of the iron moments. This motion is fro...
متن کاملDIFFUSION LAYER GROWTH MECHANISM IN ASPN METHOD USING AN IRON CAGE FOR ST52 STEEL
- The mechanism of diffusion layer growth in plasma nitrided coatings applied on a St52 steel using an active screen is investigated. The nitriding was performed at 450,500 and 550 ◦C temperature nitriding times of 5, 10 and 15 h, in a gas mixture containing 20 vol. % H2: 80 vol. % N2 and DC-pulsed plasma nitriding unit. The surface, cross section and the thickness of diffusion of specimens ...
متن کاملenvironmental effects of gol-e-gohar iron ore mine on groundwater of the area
gol-e-gohar iron ore mine of sirjan in southern part of iran is a large open pit that operates below the groundwater table and during mining operation, dewatering is required to prevent operation processes from flooding. current operation is going on by digging wells in or out of the pit and pumping to prevent flooding. as a result of the former dewatering operation a vast deep cone of depressi...
Effects of Passivation Layer on Stress Relaxation and Mass Transport in Electroplated Cu Films
Recent studies have shown that the Cu/cap layer interface is the dominant diffusion path for electromigration (EM) in Cu interconnects, making it important to develop effective methods to evaluate the effect of passivation layer on interfacial mass transport and EM lifetime for Cu interconnects. This work shows that a set of isothermal stress relaxation tests together with appropriate modeling ...
متن کاملTribological Behavior of Reinforced and Unreinforced High Chromium Cast Iron
In this paper, the metal matrix composites containing 22 wt % Cr, 2.5 wt % C and 2 to 16 volume percent TiC were processed by solidifying Fe-Cr-Ti-C in which precipitation of titaniumcarbide and chromium carbide occurred. The microstructure and abrasion resistance of in-situ synthesized composites were compared with the unreinforced high chromium white cast iron (HCWCI) containing 22 w. t. % C...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Metal Finishing Society of Japan
سال: 1974
ISSN: 1884-3395,0026-0614
DOI: 10.4139/sfj1950.25.256