Digital Photogrammetry Camera Boresight Calibration Using Ground Control Points
نویسندگان
چکیده
منابع مشابه
Geometric Camera Calibration Using Circular Control Points
Modern CCD cameras are usually capable of a spatial accuracy greater than 1/50 of the pixel size. However, such accuracy is not easily attained due to various error sources that can affect the image formation process. Current calibration methods typically assume that the observations are unbiased, the only error is the zero-mean independent and identically distributed random noise in the observ...
متن کاملTerrestrial photogrammetry without ground control points
Terrestrial photogrammetry should be the survey technique of choice when updating large scale urban maps and GIS databases, where 3D data and attribute data are required. Its main drawback is the need for Ground Control Points (GCP) to reference the survey. To make image georeferencing easier and to provide control information, the use of a simple system, made of a photogrammetric camera fasten...
متن کاملBoresight Calibration of Integrated Inertial/Camera Systems
Boresight Calibration of integrated imaging/inertial systems is a critical factor for map production, especially in the case of digital imaging sensors. The focus of this paper is therefore on boresight calibration using different approaches. Two boresight calibration approaches are presented, namely the airborne and the terrestrial approach. Traditional airborne boresight calibration has been ...
متن کاملA New Camera Calibration Method Based on Orientation Points in Digital Close-Range Industrial Photogrammetry
In order to solve the restriction of the two common calibration modes applied in digital close-range industrial photogrammetry, a new camera calibration method based on orientation points was proposed. Firstly, image sequences were obtained applying a calibration plate with five orientation points. The ellipse detection criteria were applied to eliminate the redundant information from images af...
متن کاملCamera Calibration Using Vanishing Points
This paper describes a methodformeasuringthe intrinsicparameters of a camera. If aspect ratio is already known, the method requires two images of a plane; if aspect ratio is not known, the method requires three images of the plane. (Equivalently, one image of n planes could be used instead ofn images of one plane). The plane must be marked with four points in known configuration.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
سال: 2014
ISSN: 1598-4850
DOI: 10.7848/ksgpc.2014.32.4-1.293