Directional Solidification of AlSi Alloys with Fe Intermetallic Phases
نویسندگان
چکیده
منابع مشابه
Nucleation mechanism of nano-sized NaZn13-type and α-(Fe,Si) phases in La-Fe-Si alloys during rapid solidification
The nucleation mechanism involving rapid solidification of undercooled La-Fe-Si melts has been studied experimentally and theoretically. The classical nucleation theory-based simulations show a competitive nucleation process between the α-(Fe,Si) phase (size approximately 10 to 30 nm) and the cubic NaZn13-type phase (hereinafter 1:13 phase, size approximately 200 to 400 nm) during rapid solidif...
متن کاملMathematical and Physical Modelling of Directional Solidification of Aerospace Alloys
Defect formation in aerospace components is studied, particularly in regions of directionally solidified casting with stepwise increase in cross-section, which is a typical geometric configuration for such components as turbine blades. Given the fact that the geometry of a casting is directly related to probability of defect formation, special attention was paid to grain defects in regions of c...
متن کاملNon-equilibrium solidification of concentrated Fe–Ge alloys
The solidification of concentrated alloys containing ordered compounds is less well understood. These alloys often exhibit complex phase hange like peritectic reaction during liquid to solid transformation. The Fe-rich part of Fe–Ge binary alloy system consists of several critical oints and ordered–disorder transitions and can be used as a model system to study the effect of departure from equi...
متن کاملThe preparation of the Ti-Al alloys based on intermetallic phases
This article deals with a method of obtaining materials in the Ti-Al system. Research was carried out in accordance with the phase diagram of the system state. It was established, that both single-phase and multiphase systems, containing finely dispersed intermetallic compositions of phases Ti3Al, TiAl and TiAl3, are formed. Additionally, it was found that the pure finely dispersed (coherent-sc...
متن کاملPrecipitates and intermetallic phases in precipitation hardening Al–Cu–Mg–(Li) based alloys
The present study contains a critical review of work on the formation of precipitates and intermetallic phases in dilute precipitation hardening Al–Cu–Mg based alloys with and without Li additions. Although many suggestions for the existence of pre-precipitates in Al–Cu–Mg alloys with a Cu/Mg atomic ratio close to 1 have been made, a critical review reveals that evidence exists for only two tru...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Archives of Foundry Engineering
سال: 2014
ISSN: 1897-3310
DOI: 10.2478/afe-2014-0018