Directional Solidification of the Aluminium-Copper Eutectic Alloy
نویسندگان
چکیده
منابع مشابه
Effect of Sb Addition on the Solidification of Deeply Undercooled Ag-28.1 wt. % Cu Eutectic Alloy
Ag-28.1 wt. % Cu eutectic alloy solidifies in the form of eutectic dendrite at undercooling above 76 K. The remelting and ripening of the original lamellar eutectics result in the formation of the anomalous eutectics in the final microstructure. The addition of the third element Sb (0.5 and 1 wt. %) does not change the growth mode, but enlarges the volume fraction of anomalous eutectics because...
متن کاملDirectional solidification of metal-gas eutectic and fabrication of regular porous metals
Directional solidification of metal-gas eutectic (Gasar) is a novel process for making regular porous metals. This process is based on a solid-gas eutectic reaction involving a gaseous medium and a metal or a ceramic phase, and allows an easy control of the porosity, such as its pore size, pore orientation and morphology in a wide range by properly adjusting its melting and solidification condi...
متن کاملEffect of Solidification Parameters on the Feeding Efficiency of Lm6 Aluminium Alloy Casting
Now a days, significant amount of aluminium alloy are being used to fabricate components such as engine blocks, cylinder heads, suspension control arms, wheels and pistons. In response to consumer demands for the increase in performance, the use of aluminium has grown dramatically in the recent years. So in order to produce a sound LM6 (Al-12%Si) Aluminium alloy casting, a new approach is made ...
متن کاملStrain Measurement in Aluminium Alloy during the Solidification Process Using Embedded Fibre Bragg Gratings
In recent years, the observation of the behaviour of components during the production process and over their life cycle is of increasing importance. Structural health monitoring, for example of carbon composites, is state-of-the-art research. The usage of Fibre Bragg Gratings (FBGs) in this field is of major advantage. Another possible area of application is in foundries. The internal state of ...
متن کاملEffects of Solidification Time on Mechanical Properties and Wear Behaviour of Sand Cast Aluminium Alloy
An investigation was carried out to understand the effects of solidification time of the cylindrical specimen on hardness, wear rate and the coefficient of friction of Aluminium alloy (LM4). The commercially available LM4 Aluminium alloy was melted in a crucible furnace under argon atmosphere. The molten metal was poured into sand moulds having dissimilar size holes. The cast rods were tested f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Transactions, JIM
سال: 1999
ISSN: 0916-1821,2432-471X
DOI: 10.2320/matertrans1989.40.989