Discontinuity Detection in the Shield Metal Arc Welding Process
نویسندگان
چکیده
منابع مشابه
Discontinuity Detection in the Shield Metal Arc Welding Process
This work proposes a new methodology for the detection of discontinuities in the weld bead applied in Shielded Metal Arc Welding (SMAW) processes. The detection system is based on two sensors-a microphone and piezoelectric-that acquire acoustic emissions generated during the welding. The feature vectors extracted from the sensor dataset are used to construct classifier models. The approaches ba...
متن کاملMechanically assisted droplet transfer process in gas metal arc welding
Gas metal arc welding has been generally accepted as the preferred joining technique due to its advantages in high production and automated welding applications. Separate control of arc energy and arc force is an essential way to improve the welding quality and to obtain the projected metal transfer mode. One of the most eVective methods for obtaining separate control is to exert an additional ...
متن کاملMetal Transfer and Arc Plasma in Gas Metal Arc Welding
This article analyzes the transient complex heat transfer and fluid flow in molten metal and arc plasma during the gas metal arc welding process. The model predicts the formation, growth, detachment, and transfer of droplets from the tip of a continuously fed electrode under the influences of several competing forces including gravity, electromagnetic force, arc pressure, plasma shear stress, a...
متن کاملArc welding Control for Shaped Metal Deposition Process
This paper is focused on the study and the control of a deposition process of robotic arc welding. The process consists of a SMD (Shaped Metal Deposition) system, that is a novel rapid prototyping tungsten inert gas (TIG) welding technique leading to near-net-shape, using a layer by layer deposition technique. An experimental setup has been properly implemented in order to study the system and ...
متن کاملRobotic Shielded Metal Arc Welding
In this work, the development and validation of a methodology for robotic welding with covered electrodes (SMAW) using a variation of the tool center point (TCP) model is shown. The covered electrode becomes part of the kinematic model of the robot as an additional prismatic joint, whose movement is determined by the electrode consumption or melting rate. This allows programming the trajectory ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2017
ISSN: 1424-8220
DOI: 10.3390/s17051082