Discrete crack growth analysis methodology for through cracks in pressurized fuselage structures
نویسندگان
چکیده
منابع مشابه
Slow Crack Growth-Notches-Pressurized Polyethylene Pipes
A general method for predicting the life time of a polyethylene structure that fails by slow crack growth was applied to the case of externally notched pressurized pipes. An analysis of experimental data indicated that the residual stress must be taken into account. The critical notch depths associated with a given life time were calculated as a function of pipe size, PENT value of the resin an...
متن کاملFatigue growth of multiple-cracks near a row of fastener-holes in a fuselage lap-joint
The fatigue growth of multiple cracks, of arbitrary lengths, emanating from a row of fastener holes in a bonded, riveted, lap joint in a pressurized aircraft fuselage is studied. The effects of residual stresses due to a rivet misfit, and of plastic deformation near the hole, are included. A Schwartz Neumann alternating method which uses the analytical solution for a row of multiple colinear cr...
متن کاملGrowth of Multiple Cracks and Their Linkup in a Fuselage Lap Joint
An issue of concern in aging aircraft is the growth of multiple cracks emanating from a row of fastener holes, typically in a pressurized aircraft fuselage lap splice. This multisite damage (MSB), or widespread fatigue damage, if allowed to progress, can suddenly become catastrophic. The understanding of the failure behavior dictates the level of compromise between safety and economy. The compl...
متن کاملProbabilistic Fatigue Crack Growth Analysis of Offshore Structures, with Reliability Updating Through Inspection
A stochastic mtiel for fatiguecrackgrowth is applied.which accountsfor uncertainties in loading, initialand critical defectsizes,materialparameters includingspatialvariation,and in the uncertainty relatedto computationof the stressintensityfactor. Failu~ probabilities are computed by first-and second-orderreliability methods and sensitivity factorsare &termined. Model updating based on inservic...
متن کاملA development in the finite volume method for the crack growth analysis without global remeshing
Crack growth analysis has remained one of the challenging problems in the fracture mechanics of structures. On the other hand, the fatigue crack growth is a common phenomenon in the components of structures like airplanes, navies and fluid storages where the fracture due to crack should be considered in the design of these structures. In this paper, the finite volume method (FVM) is extended fo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Numerical Methods in Engineering
سال: 1995
ISSN: 0029-5981,1097-0207
DOI: 10.1002/nme.1620381003