Disinfection Methods for Swimming Pool Water: Byproduct Formation and Control
نویسندگان
چکیده
منابع مشابه
Disinfection byproduct formation in swimming pools
The fate of organic nitrogen and carbon introduced into a swimming pool by pool users has been studied using a 2.2 m model pool. The study made use of a body fluid analogue, containing the primary endogenous organic amino compounds, and a soiling analogue represented by humic acid. The system was used to examine the effect of organic loading and organic carbon source (i.e. amino or humic acid) ...
متن کاملDisinfection by-product formation of UV treated swimming pool water
Water samples from 3 indoor swimming pool facilities were tested to evaluate UV-induced effects on swimming pool water chemistry. Concentration change of several DBPs was investigated in experiments including medium pressure UV treatment with and without chlorine and post-UV chlorination. Post-UV chlorine consumption increased, dose-dependently, with UV treatment dose. A clear absence of trihal...
متن کاملDisinfection byproducts in swimming pool water in Sanandj, Iran
The present study aimed to determine the concentrations of several disinfection byproducts (DBPs), including trihalomethanes (THMs), haloacetic acids (HAAs), and haloacetonitriles (HANs), in the public and private swimming pools in Sanandaj, Iran (n=16). Correlations between DBP levels with water quality parameters (free chlorine, pH, total organic carbon, temperature, number of swimme...
متن کاملDrowning in disinfection byproducts? Assessing swimming pool water.
Disinfection is mandatory for swimming pools: public pools are usually disinfected by gaseous chlorine or sodium hypochlorite and cartridge filters; home pools typically use stabilized chlorine. These methods produce a variety of disinfection byproducts (DBPs), such as trihalomethanes (THMs), which are regulated carcinogenic DBPs in drinking water that have been detected in the blood and breath...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Water
سال: 2018
ISSN: 2073-4441
DOI: 10.3390/w10060797