Dispersion characteristics of dissimilar materials in a fluidized bed with unevenly distributed fluidizing air
نویسندگان
چکیده
منابع مشابه
Modeling a Biomass Fluidizing Bed With Side Port Air Injection
Fluidized beds are used to gasify materials such as coal or biomass in the production of producer gas. Modeling these reactors using computational fluid dynamics is advantageous when performing parametric studies for design and scale-up. While two-dimensional simulations are easier to perform than threedimensional simulations, they may not capture the proper physics. This paper compares twoand ...
متن کاملAir gasification of palm empty fruit bunch in a fluidized bed gasifier using various bed materials
0TUse of lignocellulosic biomass as an alternative, renewable and sustainable source of energy has fulfilled part of the growing demand for energy in developed countries. Amongst various technologies applied to convert biomass wastes to biofuel and bioenergy, biomass gasification has attracted considerable attention. In this work, gasification of palm empty fruit bunch as a potential lignocellu...
متن کاملControl of a Fluidized Bed Polyethylene Reactor
In present paper, dynamic behavior and control of a fluidized bed reactor for polyethylene production has been considered. A double active sites model for Ziegler-Natta catalysts is used for simulation of polymerization reaction. Hydrodynamic behavior of the bed is modeled using a two phase model including bubble and emulsion phases in which bubble phase has plug flow pattern with different...
متن کاملfluidized bed drying characteristics of soybeans
the present study investigated the influence of air temperature and velocity on the drying kinetics and specific energy consumption during fluidized bed drying of soybean at 80, 100, 120 and 140ºc and airflow rates of 1.8, 3.1 and 4.5 m s-1. six mathematical models for describing the fluidized bed drying behavior were investigated. the value of the drying rate coefficient (k) increased with inc...
متن کاملFluidization Characteristics of a Prototype Fluidized Bed Reactor
The fluidization characteristics of a prototype-fluidized bed laboratory reactor were understudied in order to investigate the suitable conditions at which the dehydrogenation reaction of butane could be carried out. To achieve this, a reactor with an effective volume of 1100ml was fabricated and coupled with temperature and pressure accessories. Zeolites were obtained from the market and clay ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Powder Technology
سال: 2017
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2017.07.017