Dispersion of square solid-core photonic bandgap fibers
نویسندگان
چکیده
منابع مشابه
Solid-core photonic bandgap fibers for cladding-pumped Raman amplification.
Cladding-pumped solid-core photonic bandgap Raman fiber amplifiers are analyzed theoretically as possible candidates for power scaling. An example fiber design with a mode field diameter of 46 µm and a cladding diameter of 250 µm is calculated to exhibit 0.12 dB/km of confinement loss at the first Stokes wavelength and >10 dB/m at the second Stokes wavelength for a pump wavelength of 1.567 µm w...
متن کاملEnhancement of acoustic sensitivity of hollow-core photonic bandgap fibers.
The acoustic pressure sensitivities of hollow-core photonic bandgap fibers (HC-PBFs) with different thicknesses of silica outer-cladding and polymer jacket were experimentally investigated. Experiment with a HC-PBF with 7 μm-thick silica outer cladding and 100 μm-thick Parylene C jacket demonstrated a pressure sensitivity 10 dB higher than the commercial HC-1550-02 fiber and 25 dB higher than a...
متن کاملDetailed theoretical investigation of bending properties in solid-core photonic bandgap fibers.
In this paper, detailed properties of bent solid-core photonic bandgap fibers (SC-PBGFs) are investigated. We propose an approximate equivalent straight waveguide (ESW) formulation for photonic bandgap (PBG) edges, which is convenient to see qualitatively which radiation (centripetal or centrifugal radiation) mainly occurs and the impact of bend losses for an operating wavelength. In particular...
متن کاملPhotonic Bandgap Propagation in All-Solid Chalcogenide Microstructured Optical Fibers
An original way to obtain fibers with special chromatic dispersion and single-mode behavior is to consider microstructured optical fibers (MOFs). These fibers present unique optical properties thanks to the high degree of freedom in the design of their geometrical structure. In this study, the first all-solid all-chalcogenide MOFs exhibiting photonic bandgap transmission have been achieved and ...
متن کاملIn-fiber polarimeters based on hollow-core photonic bandgap fibers.
In-fiber polarimeters or polarization mode interferometers (PMIs) are fabricated by cascading two CO2-laser-induced in-fiber polarizers along a piece of hollow-core photonic bandgap fiber. Since the two interfering beams are the orthogonal polarizations of the fundamental mode, which are tightly confined to the core and have much lower loss than higher order modes, the PMIs can have either shor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2004
ISSN: 1094-4087
DOI: 10.1364/opex.12.002825