Dispersive and filter loss performance of calcium carbonate nanoparticles in water for drilling fluid applications
نویسندگان
چکیده
Adding nanoparticles in a drilling fluid can aid the sealing of nanopores borehole wall rock and mud cake; this way, filtrate loss be reduced is stabilized. In work, spectrophotometric method was used to study effect dispersants on calcium carbonate nanoparticles. The best dispersion achieved at cetyltrimethyl ammonium bromide (CTAB) concentration 4 wt%, dispersing time 45 min, pH value 8 stirring speed 900 rpm. structure analysis showed that adsorption layer formed surface after CTAB modification, no new crystalline compounds appeared. Under these optimized conditions, aggregation prevented as manifested by dramatically decreased average particle size while hydrophilicity Zeta potential both increased. Furthermore, we incorporating such well dispersed exhibit filter thus better performance compared without dispersants.
منابع مشابه
The great potential of nanomaterials in drilling & drilling fluid applications
The continuous development of global economy with decreasing in available hydrocarbon sources and increasing discovery and extraction costs due to decrease in-situ oil and gas reservoir, displays the necessity of using new techniques for the improve rate of penetration and productivity in well. Nanotechnology has already contributed significantly to technological advances in the energy industri...
متن کاملThe great potential of nanomaterials in drilling & drilling fluid applications
The continuous development of global economy with decreasing in available hydrocarbon sources and increasing discovery and extraction costs due to decrease in-situ oil and gas reservoir, displays the necessity of using new techniques for the improve rate of penetration and productivity in well. Nanotechnology has already contributed significantly to technological advances in the energy industri...
متن کاملDecreasing of water loss and mud cake thickness by CMC nanoparticles in mud drilling
CMC polymer is used as an additive to decrease water loss and mud-cake-thickness in mud drilling. In this study, the effect of CMC and CMC nanoparticles on water loss and mud-cake-thickness in mud drilling is investigated. CMC nanoparticles are made by using of ball milling and their size is measured by Particle size analyzer. CMC and CMC nanoparticles which were prepared by Hamilton batch mixe...
متن کاملDecreasing of water loss and mud cake thickness by CMC nanoparticles in mud drilling
CMC polymer is used as an additive to decrease water loss and mud-cake-thickness in mud drilling. In this study, the effect of CMC and CMC nanoparticles on water loss and mud-cake-thickness in mud drilling is investigated. CMC nanoparticles are made by using of ball milling and their size is measured by Particle size analyzer. CMC and CMC nanoparticles which were prepared by Hamilton batch mixe...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nanotechnology
سال: 2021
ISSN: ['1361-6528', '0957-4484']
DOI: https://doi.org/10.1088/1361-6528/ac1dd2