Double-loop Thermoacoustic Stirling Cooler-I. Work Flow Measurements-

Experimental studies of a thermoacoustic Stirling prime mover and its application to a cooler

An acoustic field spontaneously induced in a thermoacoustic prime mover consisting of a looped tube and resonator is determined through simultaneously measurements of pressure P and velocity U. A thermal efficiency of the thermoacoustic prime mover of this type has been reported to reach 30%. The measurements of the acoustic field in the present system revealed that a phase lead of U relative t...

The experimental studies of thermoacoustic cooler.

The experimental studies of thermoacoustic cooler consisting of acoustic loop-tube were carried out. The loop-tube was filled with the mixture of air and helium gas or air at atmospheric pressure. The dimensions of the loop-tube were 3.3 m of length, 44 mm of inner diameter and 4 mm of thickness. A pair of stacks (stack 1 and stack 2) which were sandwiched between two heat exchangers was placed...

Study of a thermo acoustic Stirling cooler

A thermoacoustic-stirling cooler is built and performance measurements are performed. The cooler uses the acoustic power produced by a linear motor to pump heat through a regenerator from a cold heat exchanger to an ambient one. The cooler incorporates a compact acoustic network to create the traveling-wave phasing necessary to operate in a Stirling cycle. The network has a coaxial topology ins...

A hot air driven thermoacoustic-Stirling engine

Modeling System Dynamics in a MEMS-Based Stirling Cooler

Micro-scale devices based on the Stirling cycle are an attractive choice for chipand board-level electronics. A new Stirling cycle micro-refrigeration system composed of arrays of silicon MEMS cooling elements has been designed. COMSOL is used to evaluate the thermal performance of the system. Simulation of compressible flow and heat transfer with a large deformed mesh has been successfully imp...