Double Sided Incremental Forming: Capabilities and Challenges
نویسندگان
چکیده
منابع مشابه
Modeling and Validation of the Layered Deformation for Double Sided Incremental Forming
This work proposes an equivalent layered model based on the contour trajectory for Double Sided Incremental Forming (DSIF). The layered deformation and displacement are analyzed for the truncated cones with different height. The displacement for every layer is obtained by numerical analysis and theoretical calculation under the assumption of straight projection. A general method is introduced t...
متن کاملDesign Optimization and Construction of Double-Sided Linear Induction Motor
Linear induction motors have single and double-sided structures which are used in special applications, according to their advantages and disadvantages. Due to advantages such as lack of normal forces in double-sided type, these motors are more controllable and popular than the single-sided type, especially for transportation applications. In literature, single-sided linear induction motors ha...
متن کاملInvestigation on Formability of Tailor-Welded Blanks in Incremental Forming
Steel laser tailor-welded blanks (TWBs) are produced by end-to-end joining of base sheets using different welding methods. In this article, the formability of laser TWBs of St12 and St14 with thicknesses of 1 mm and 1.5 in single point incremental forming process were experimentally and numerically investigated. First, the forming limit wall angle was experimentally determined for each of the b...
متن کاملNumerical and Experimental Analysis and Optimization of Process Parameters of AA1050 Incremental Sheet Forming
The incremental sheet metal forming (ISMF) process is a new and flexible method that is well suited for small batch production or prototyping. This paper studies the use of the finite element method in the incremental forming process of AA1050 sheets to investigate the influence of tool diameter, vertical step size, and friction coefficient on forming force, spring-back, and thickness distribut...
متن کاملThe Effects of Forming Parameters on the Single Point Incremental Forming of 1050 Aluminum Alloy Sheet
The single point incremental forming (SPIF) is one of the dieless forming processes which is widely used in the sheet metal forming. The correct selection of the SPIF parameters influences the formability and quality of the product. In the present study, the Gurson-Tvergaard Needleman (GTN) damage model was used for the fracture prediction in the numerical simulation of the SPIF process of alum...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2018
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/1063/1/012170