Dressing of Resinoid Bond Wheel with Moving Heat Source (1st Report)
نویسندگان
چکیده
منابع مشابه
Transient Three-Dimensional Thermal Analysis of a Slab with internal heat generation and heated by a Point Moving Heat Source
In this work, analysis of transient three-dimensional heat transfer in a slab with internal heat generation and heated by a point moving heat source along its axis is carried out using integral transforms methods. The heat input into slab or workpiece by the moving heat source is considered in the model. From the results, it was established that the temperature of the material during the heat t...
متن کاملdeterminat ion of temperature distribution around a moving heat source
in this paper, the temperature distribution around a moving heat source had been investigated including the phase change and non phase change . in non-phase change state, the governing equation was converted to finite difference equation by finite volume method and the equation was solved by alternating direction implicit method. this method was unconditionally stable . in phase change state, t...
متن کاملMonitoring of wheel dressing operations for precision grinding
In grinding operation, on-line process monitoring of dressing will ensure the quality of the grinding wheel and will achieve reproducible surface finish. The results of a study conducted to evaluate the feasibility and effectiveness of Acoustic Emission (AE) sensors in online monitoring of dressing is reported. Two aspects of the process are addressed. The first is the detection of undesired wh...
متن کاملPancreas Transplantation and Report of 1st one in IRAN
SUMMARY Since 1923, the type I diabetic patients are treating with injections of insulin. Mortality of these patients decreased, comparing with noninsulin using patients, but many of them developed complications of diabetes mellitus, like nephropathy, retinopathy and neuropathy. The choice for treating this diseas and preventing its complications is pancrease transplantation, The 1st pancreas...
متن کامل2D and 3D Unsteady Simulation of the Heat Transfer in the Sample during Heat Treatment by Moving Heat Source
The aim of the performed work is to establish the 2D and 3D model of direct unsteady task of sample heat treatment by moving source employing computer model on the basis of finite element method. Complex boundary condition on heat loaded sample surface is the essential feature of the task. Computer model describes heat treatment of the sample during heat source movement over the sample surface....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 1993
ISSN: 0912-0289,1882-675X
DOI: 10.2493/jjspe.59.1967