Driver for 5-phase stepper motor pentagon connection with dedicated ICs
نویسندگان
چکیده
منابع مشابه
Stepper motor and driver selection
Figure 1. Pull-out torque and output power for a 57 mm PM stepper driven by a unipolar L/R-driver and a NJM3770A bipolar constant current driver. Stepper motors are used in many different types of applications this makes it difficult to recommend a general step-by-step design flow chart. The design process is more an iterative process, involving experience, calculation and experimentation. The ...
متن کاملStudy on High Current Pwm Unipolar Four Phases Driver for Stepper Motor Control
This paper presents the study on high – current PWM, unipolar stepper motor controller/driver, are remarkable for simplicity, high – reliability, multifunctional facilities for four phases hybrid stepper motor.
متن کاملStepper Motor Actuated Microvalve
We present the design, fabrication and characterization of a novel microvalve realized by combining micro and fine machining techniques. The design is for high flow rates at high pressure difference between inlet and outlet, burst pressure of up to 15 bars, there is no power consumption required for the valve to maintain its position during operation in any intermediate state and the process ga...
متن کاملThe L297 Stepper Motor Controller
November 2003 The L297 Stepper Motor Controller is primarily intended for use with an L298N or L293E bridge driver in stepper motor driving applications. It receives control signals from the system’s controller, usually a microcomputer chip, and provides all the necessary drive signals for the power stage. Additionally, it includes two PWM chopper circuits to regulate the current in the motor w...
متن کاملStepper Motor Model for Dynamic Simulation
The modeling and simulation of the electromechanical behaviour of stepper motors are of high interest because they are often used for space application. A commercially available multibody dynamic simulation software, which sets up the equations of motion and the transfer function of the motor and solves them numerically, was used. The results show, that both the dynamic simulation software and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Manufacturing
سال: 2018
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2018.03.061