Droplet Formation and Dripping Behavior during the Electroslag Remelting Process with Two Series-Connected Electrodes
نویسندگان
چکیده
منابع مشابه
Technology for Electroslag Remelting with Rotation of the Consumable Electrode
is known that metal which is produced by the method of electroslag remelting (ESR) has service properties superior to those of metal made by open refining and casting. This can be attributed to the better conditions which exist for refining in the specially chosen slag and for the crystallization of the metal in the case of ESR. However, the need for a two-stage metallurgical conversion (essent...
متن کاملThe Chaotic Dripping Faucet: Investigation of Chaotic Behavior in Water Droplet Formation
The dripping faucet experiment seeks to provide a simple example of a system that exhibits predictable dynamics that transition to an unpredictable, chaotic behavior under certain conditions. The time between water drops falling from a nozzle, is measured with a straightforward experimental setup using a photodiode and a laser. The period, or time between falling drops, is dependent on the flow...
متن کاملThe Structural Evolution and Segregation in a Dual Alloy Ingot Processed by Electroslag Remelting
The structural evolution and segregation in a dual alloy made by electroslag remelting (ESR) was investigated by various analytical techniques. The results show that the macrostructure of the ingot consists of two crystallization structures: one is a quite narrow, fine, equiaxed grain region at the edge and the other is a columnar grain region, which plays a leading role. The typical columnar s...
متن کاملconsequence analysis of the leakage, ignition and explosion during high pressure sour gas injection process to the oil reservoir
there is no doubt that human being needs to become integrated with industry and industry needs to be progressed, daily. on the other hand, serious events in industrial units specially in oil industries has been shown that such damages and events are industry related ones. the consequence of such events and damages which resulted in chemical and poisoned explosions and loss of life and property ...
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2020
ISSN: 2075-4701
DOI: 10.3390/met10030386