Dry Etching Technology for Sub-Half-Micron Devises
نویسندگان
چکیده
منابع مشابه
An Integrated Flow for Technology Remapping and Placement of Sub-half-micron Circuits
This paper presents a new design flow, FPDSiMPA, and a set of techniques for synthesizing high-performance sub-half micron logic circuits. FPD-SiMPA consists of logic partitioning, floorplanning, global routing, and timing analysis/budgeting steps, followed by technology remapping and detailed placement of the selected logic clusters. The strength of the approach lies in the dynamic programming...
متن کاملDeep sub-micron stud-via technology for superconductor VLSI circuits
A fabrication process has been developed for fully planarized Nb-based superconducting inter-layer connections (vias) with minimum size down to 250 nm for superconductor very large scale integrated (VLSI) circuits with 8 and 10 superconducting layers on 200-mm wafers. Instead of single Nb wiring layers, it utilizes Nb/Al/Nb trilayers for each wiring layer to form Nb pillars (studs) providing ve...
متن کاملWet Etching Tapered Optical Fibers to Sub-micron Diameters for Sensing Application
In this thesis we explore a novel technique to fabricate sub-micron diameter tapered fibers for sensor applications. Physically the light propagating in a tapered fiber has an evanescent field that extends into the medium surrounding the fiber containing an analyte. A sub-micron diameter taper can expels most the electromagnetic energy into the medium thus increasing the sensitivity of the meas...
متن کاملDry etching and sputtering.
Dry etching is an important process for micro- and nanofabrication. Sputtering effects can arise in two contexts within a dry-etch process. Incoming ions cause removal of volatile products that arise from the interaction between the dry-etch plasma and the surface to be etched. Also, the momentum transfer of an incoming ion can cause direct removal of the material to be etched, which is undesir...
متن کاملEtching Technology for Microchannels
can be varied from perfectly isotropic to exactly straight. Also positive or negative tapering is po~s ib le .~ Various ways of fabricating channels in silicon are The basic approach for disyussed. Some new channels are presented: the constructing channels in GPSIC's and the LPCVD covered channels. Also some silicon is almost always attention is paid to the problem of making connections as depi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEJ Transactions on Fundamentals and Materials
سال: 1991
ISSN: 0385-4205,1347-5533
DOI: 10.1541/ieejfms1990.111.7_606