Dry plasma processing for industrial crystalline silicon solar cell production

Effect of Silicon Nanowire on Crystalline Silicon Solar Cell Characteristics

Nanowires (NWs) are recently used in several sensor or actuator devices to improve their ordered characteristics. Silicon nanowire (Si NW) is one of the most attractive one-dimensional nanostructures semiconductors because of its unique electrical and optical properties. In this paper, silicon nanowire (Si NW), is synthesized and characterized for application in photovoltaic device. Si NWs are ...

Crystalline Silicon Solar Cells

Front page headlines in the New York Times and the Wall Street Journal in 1954 heralded to the world the demonstration of the first reasonably efficient solar cells, an event made possible by the rapid development of crystalline silicon technology for miniaturised electronics. Since that time, the majority of solar cells fabricated to date have been based on silicon in monocrystalline or large-...

Rapid Thermal Processing of Crystalline Silicon Materials and Solar Cells

Efficiency improvement of crystalline silicon solar cells

To increase the efficiency and reduce the production cost of crystalline silicon (c-Si) solar cells, efforts in the photovoltaic industry are currently put on the process optimization of the cell. Sodium hydroxide/Potassium hydroxide (NaOH/KOH) and isopropyl alcohol (IPA) are widely used in the standard alkaline texturization of mono crystalline silicon (mc-Si) wafers for enhancing the optical ...

Thin-film crystalline silicon solar cells

A photoelectric conversion efficiency of over 10% has been achieved in thin-film polycrystalline silicon solar cells which consists of a 2 μm thick layer of polycrystalline silicon with a very small grain size (microcrystalline silicon) formed by low-temperature plasma CVD. This has shown that if the recombination velocity at grain boundaries can be made very small, then it is not necessarily i...