Dry sliding wear behavior of AA6061 aluminum alloy composites reinforced rice husk ash particulates produced using compocasting
نویسندگان
چکیده
منابع مشابه
Mechanical Characterization and Wear Behavior of Nano TiO2 Particulates Reinforced Al7075 Alloy Composites
In the current research work synthesis, characterization, mechanical and wear behavior of 5 and 10 wt. % of nano TiO2 particulates reinforced Al7075 alloy composites are inspected. The Al7075 alloy and nano TiO2 particle composites were provided by melt stir system. After the preparation, the prepared composites were analyzed by SEM, EDS, and XRD for inquiring the microstr...
متن کاملWear behaviour of AA6061 aluminium alloy and its composites
This study investigates the wear resistance of four AA6061 MMCs together with the monolithic AA6061 alloy, all in the T6 condition, using a pin-on-disc test. In addition to the widely studied 20 vol.% Saffil MMCs, the present investigation considered a hybrid of 11% Saffil + 20% Sic, and a high volume fraction Sic, MMC. AA6061 + 60% Sic,. The wear behaviour against P400 Sic grit adhesive bonded...
متن کاملDry Sliding Wear Behavior of Epoxy-Rubber Dust Composites
Composite pins of rubber dust collected from tyre retreading centres of trucks, cars and buses etc.and epoxy with weight percentages of 10. 15, and 20 % of rubber (weight fractions of 9, 13 and 17 % respectively) have been prepared in house with the help of a split wooden mould. The pins were tested in a pin-on-disc wear monitor to determine the co-efficient of friction and weight losses with v...
متن کاملMechanical Behavior of Aluminum (AlSi10Mg)-RHA Composite
Rice Husk Ash (RHA) of three different particle size ranges (50 – 75 μm), (75 – 100μm) and (100 – 150μm) in 3, 6, 9 and 12 % by weight was reinforced with the aluminium alloy using stir cast route. The microstructure and mechanical properties of the fabricated composites were analyzed. The results reveal that the tensile strength, compressive strength and hardness of the aluminum alloy composit...
متن کاملMarine Durability Characteristics of Rice Husk Ash-Modified Reinforced Concrete
This paper addresses the potential use of Rice Husk Ash (RHA) as a cementitious material in concrete mixes. RHA is produced from the burning of rice husk which is a byproduct of rice milling. The ash content is about 18-22% by weight of the rice husks. Research has shown that concrete made with RHA as a partial cement substitute to levels of 10% to 20% by weight of cement has superior performan...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Asian Ceramic Societies
سال: 2017
ISSN: 2187-0764
DOI: 10.1016/j.jascer.2017.03.005