Dyes, Dyeing and Functional Finishing

Dyeing with Disperse Dyes

Before the First World War, almost all dyes were applied from solution in an aqueous dyebath to substrates such as cotton, wool, silk and other natural fibres. However, the introduction of a man-made fibre, cellulose acetate, with its inherent hydrophobic nature, created a situation where very few of the available dyes had affinity for the new fibre. Water-soluble anionic dyes had little substa...

Dyeing of Indian wool with reactive dyes

Wool fibres have been chemically modified by reduction I chlorination under acidic pH Ipre-swelling in conc. formic acid prior to their dyeing with indigenous reactive dyes of different molecular configurations to enhance the reactive dye uptake on wool fibre substrate. The pretreatment processes are inexpensive, less harmful and less time consuming as against the use of imported special wool r...

Dyeing Properties Using Natural Dyes from Rhubarb:

In this investigation dyeing of alginate fiber was carried out after cationic treatment of 11 EPTAC (2, 3-Epoxypropyl Trimethyl Ammonium Chloride). Optimum dyeing process and 12 parameter show good dyeing performance when alginate fiber dyed with rhubarb dye. In addition 13 to cationic treatment is taken into account for alginate fiber to improve fastness, color strength, 14 breaking strength. ...

Dyeing of Textiles with Natural Dyes

Dyeing of Polyester with Disperse Dyes: Part 2. Synthesis and Dyeing Characteristics of Some Azo Disperse Dyes for Polyester Fabrics.

The goal of this study was to utilize carrier for accelerating the rate of dyeing not only to enhance dyeing of polyester fabrics dyed with disperse dyes 3a,b, but also to save energy. Both the color strength expressed as dye uptake and the fastness properties of the dyed fabrics were evaluated.