Dynamic Analysis of Pile Driving

Analysis of Centrifuge Pile Tests; Simulation of Pile-driving

Modeling of vibratory pile driving

Vibratory installation of piles and casings can be extremely economical and therefore the contractors’ preferred method of pile driving. Compared to impact pile driving it also has the advantage of reduced noise pollution. Unfortunately, this installation method is still fraught with uncertainties. The foremost question is driveability and equally important is the question of bearing capacity o...

Observed increases in offshore pile driving resistance

This paper presents 53 well-documented cases of the short-term set-up of open-ended steel pipe piles driven at two fields in the North Sea. Increases in soil resistance during driving (set-up) were observed when pile driving was re-started after delays typically ranging between 24 h and 100 h. The soil encountered at the sites consisted of overconsolidated sands and clays, where the clays varie...

Nonlinear Dynamic Analysis of Pile Foundation Subjected to Strong Ground Motion Using Fiber Elements

In this paper, pile behavior embedded in layered soil deposits subjected to seismic loadings is analyzed using a nonlinear fiber element for simulation of soil – pile interactions. In the created model, both pile and surrounding soil are modeled using fiber elements in a practical Beam on Nonlinear Winkler Foundation (BNWF) concept. Herein, the features of DRAIN–3DX finite element software are ...

Dynamic Pile-soil-pile Interaction. Part I: Analysis of Axial Vibration

Simple methods of analysis are developed for computing the dynamic steady-state axial response of floating pile groups embedded in homogeneous and non-homogeneous soil deposits. Physically-motivated approximations are introduced to account for the interaction between two individual piles. It is found that such an interaction arises chiefly from the ‘interference’ of wave fields originating alon...