Dynamic behavior of a circular cylinder under impulsive loads. (Stress concentration associated with stress waves)
نویسندگان
چکیده
منابع مشابه
Composite Strips with a Circular Stress Concentration under Tension
A series of tensile experiments were performed on S2 glass/toughened epoxy composite strips with a center hole or a pin joint at various temperatures within the range of −60C and 125C. Four different lay-up configurations each of 24 layers: [0°], [0°/90°], [45°/−45°] and [0°/45°/90°/−45°] and four different hole diameters: 1/8”, 1/4”, 3/8”, 1/2” were used in both types of specimens. For certain...
متن کاملEffect of initial stress on the propagation of flexural waves in transversely isotropic magnetoelastic circular cylinder
The goal of this study is to investigate the effect of the initial stress and transverse isotropy on the dispersion relation of flexural wave in a conducting circular cylinder subject to the initial state of stress of the form of hydrostatic tension or compression. The free stress conditions on the inner and outer surfaces of the hollow circular cylinder were used to form the dispersion relatio...
متن کاملCircular loads on the surface of a half-space: Displacement and stress discontinuities under the load
Based on the expressions for the surface displacements due to concentrated vertical and tangential forces acting on the free surface of a half-space, available from the well-known Boussinesq and Cerruti elasticity problems, the surface displacements and the surface stresses are derived for a half-space loaded by the vertical and tangential circular ring loads, or by uniform normal and radial sh...
متن کاملDynamic finite element analysis of impulsive stress waves propagating from distal end of femur.
The human femur is subjected to an impulsive load at its distal end during daily life. Femoral bone fracture caused by impact loading is common in elderly women. It is important to clarify the dynamic response of the femur and to evaluate the change in its stress state during impact loading. A 3-dimensional model of the femur was prepared in the present study, and the impulsive stress waves pro...
متن کاملStress Analysis of Rotating Thick Truncated Conical Shells with Variable Thickness under Mechanical and Thermal Loads
In this paper, thermo-elastic analysis of a rotating thick truncated conical shell subjected to the temperature gradient, internal pressure and external pressure is presented. Given the existence of shear stress in the conical shell due to thickness change along the axial direction, the governing equations are obtained based on first-order shear deformation theory (FSDT). These equations are so...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1986
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.52.2680